油基钻井液用抗高温乳化剂的合成及性能  

Synthesis and Performance of One Thermostable Emulsifier for Oil Based Drilling Fluids

作　　者：刘明华[1] 胡小燕[1] 国安平[1] 张滨[1] 黄桂春[1] 郭金爱[1] 王中华[1] 

机构地区：[1]中国石化中原石油工程有限公司钻井工程技术研究院,河南濮阳457001

出　　处：《精细石油化工进展》2017年第4期9-12,共4页Advances in Fine Petrochemicals

基　　金：基金项目:中原石油工程有限公司"抗高温油基钻井液用乳化剂研制"(2016204)部分研究内容

摘　　要：采用有机胺、有机酸和第三单体合成了抗高温油基钻井液用乳化剂,考察HLB值、胺值、酸值和黏度对乳化剂在高温下乳化能力的影响,并确定了合成条件。评价了合成乳化剂在高温下不同油水比基液的乳化能力,并与现有抗高温乳化剂进行对比。结果表明,在210℃下,不同油水比基液的乳化率为100%,油水比7∶3时,破乳电压为651 V,流变性能好且乳液稳定;高温老化48 h后,钻井液性能无变化,乳化性能优于现有抗高温乳化剂,说明合成乳化剂配制的乳状液及乳化钻井液具有良好的稳定性和抗高温能力。A thermostable emulsifier for oil based drilling fluids was prepared with an organic amine,an organic acid and a third monomer,the effects of HLB value,amine value,acid value and viscosity on the emulsifying ability of this emulsifier at high temperature were studied,the synthesis conditions of this emulsifier were identified,the emulsifying capacity of this synthesized emulsifier in the base solutions of different oil-water ratio was evaluated,and the performance of this emulsifier was compared with that of existing thermostable emulsifiers. According to the results of study,the emulsification percent of this emulsifier in the base solutions of different oil-water ratio at 210 ℃ is 100%,the rheological property is good and the emulsion is stable when the oil-water ratio is 7： 3,and the emulsion breaking voltage is 651 V,and the performance of the drilling fluid changed little with the emulsifying property of this emulsifier being better than that of existing thermostable emulsifiers after the drilling fluid was aged at high temperature for 48 h,indicating that the emulsion prepared with this synthesized emulsifier and the drilling fluid added with the emulsion have high stability and good heat-resistant property.

关 键 词：油基钻井液 抗高温乳化剂 破乳电压 热稳定性 有机胺 有机酸 

分 类 号：TE254.4[石油与天然气工程—油气井工程]