基于微机械工艺的60 GHz波束扫描天线阵（英文）  

Surface micro-machined beam-steering antenna array for 60 GHz radios

作　　者：朱华[1,2] 李秀萍 冯魏巍[1,2] 要栗 肖军 田阳 汪宏 

机构地区：[1]北京邮电大学电子工程学院,北京100876 [2]北京安全生产智能监控北京市重点实验室,北京100876 [3]新加坡南洋理工大学,新加坡639798

出　　处：《红外与毫米波学报》2017年第5期563-568,580,共7页Journal of Infrared and Millimeter Waves

基　　金：Supported by the National Natural Science Foundation of China(61372036,61601050);the project(6140135010116DZ08001,6140518040116DZ02001)

摘　　要：提出了一种应用于高速率无线通信的基于微机械工艺的波束扫描天线阵.基于微机械工艺的空气填充的同轴线结构能提供低损耗的矩形微同轴传输线和馈电网络设计.设计的传输线仿真和测试插入损耗均小于0.18 dB.仿真和测试结果吻合良好.波束扫描天线阵的尺寸为17.5×14.5×0.42 mm^3,-10 dB带宽为10GHz(55~65 GHz),其带宽覆盖60 GHz标准的全频段.波束扫描角度分别为±35°和±11°.在60 GHz中心频点,增益分别为11.8 dBi和12.1 dBi.A beam-steering antenna array based on surface micro-machined process was proposed for 60 GHz high data rate wireless communication. The air-filled coaxial structure based surface micro-machined process provides lowloss rectangular micro-coaxial transmission line and feeding network. The insertion loss of designed transmission line is less than 0. 18 dB for both measured and simulated results. Simulated and measured results agree well.The size of beam-steering antenna array is 17. 5 × 14. 5 × 0. 42 mm3 and bandwidth is around 10 GHz（ 55 ~ 65 GHz） under the condition of voltage standing wave ratio（ VSWR） less than 2,which covers full frequency band standard. The steering beam directions are ± 35° with 11. 8 dB i and ± 11° with 12. 1 dBi at 60 GHz,respectively.

关 键 词：波束扫描天线阵 矩形微同轴传输线 巴特勒矩阵 低损耗 

分 类 号：TN827.3[电子电信—信息与通信工程]