一种无刷直流电机故障诊断及容错控制策略  

Fault Diagnosis and Fault-tolerant Control Strategy for Brushless DC Motor Drives

作　　者：张星宇 冯能莲[1,2] 邹广才[3] ZHANG Xingyu FENG Nenglian ZOU Guangcai(School of Engineering, Anhui Agricultural University, Hefei 230036, China College of Environment and Energy Engineering, Beijing University of Technology, Beijing 100124, China Beijing Automobile Group Co. , Ltd. , Beijing 101300, China)

机构地区：[1]安徽农业大学,合肥230036 [2]北京工业大学,北京100124 [3]北京汽车集团有限公司,北京101300

出　　处：《微电机》2017年第10期58-61,68,共5页Micromotors

基　　金：北京工业大学教育教学研究项目(ER2011-A03);国家自然科学基金资助项目(51075010);北京市教育委员会重点项目(KZ200910005007)

摘　　要：针对无刷直流电机在控制过程中存在由于转子位置传感器发生故障而导致电机无法运行的问题,提出了一种故障诊断方法并进行了试验研究。该方法通过检测电机转子位置信号的异常,使系统从有位置传感器模式切换至无位置传感器模式继续控制电机。有位置传感器模式以霍尔信号作为电机转子换相依据,无位置传感器模式以电机三相的反电动势信号为电机转子换相依据。结果表明,该故障诊断方法可以快速的定位故障并选择相应的模式运行,从而实现电机的容错控制。Rotor position sensor failed when brushless DC motor（BLDCM） was under control, which would contribute to whole system breakdown. For this question, a new fault diagnosis method was put forward and the experiment had been carried out. By detecting the abnormal signal of the non-position sensor mode which keep the motor running. The position sensor mode was based on hall signal and the non-position sensor mode was based on the back EMF signal from motor＇ s three-phase. The results show that the fault diagnosis method can locate the fault quickly and accurately, and choose the corresponding mode to run, so that the fault tolerance control of the motor can be achieved.

关 键 词：无刷直流电机 故障诊断 容错控制 转子位置传感器 

分 类 号：TM361[电气工程—电机] TP272[自动化与计算机技术—检测技术与自动化装置]