检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]安徽工业大学化学与化工学院,安徽马鞍山243002
出 处:《润滑与密封》2017年第11期53-57,共5页Lubrication Engineering
基 金:教育部高校留学回国人员科研项目;国家自然科学基金项目(50975002)
摘 要:利用自制抛光液对微晶玻璃进行化学机械抛光,研究络合剂、氧化剂、润滑剂种类及添加量对微晶玻璃化学机械抛光材料去除速率和表面粗糙度的影响。结果表明:抛光液中加入质量分数0.2%的EDTA络合剂后,能大幅降低材料表面粗糙度;加入质量分数2%的过硫酸铵氧化剂后能得到较光滑的材料表面和较高的材料去除速率;加入质量分数为0.2%的丙三醇润滑剂后能降低材料表面粗糙度。将EDTA络合剂、过硫酸铵氧化剂丙、三醇润滑剂加入SiO_2抛光液中对微晶玻璃进行化学机械抛光,利用原子力显微镜观察抛光微晶玻璃抛光前后的表面形貌。结果表明,抛光后微晶玻璃表面极为平整,达到了0.12 nm的纳米级光滑表面,且材料去除速率达到72.8 nm/min。Chemical mechanical polishing experiments of glass ceramics substrates were carried out by using self-made polishing liquid to investigate the effects of the species and the concentration of complexing agent ,the kinds of oxidant,the species and the concentration of lubricant on the material removal rate and the surface roughness.The experimental results reveal that the surface roughness can be significantly reduces by adding EDTA with 0. 2% mass fraction, the higher materi- al removal rate and the more smooth surface can he obtained by adding (NH4) 2S2O8 with 2% mass fraction,and the sur- face roughness can be reduced by adding glycerol with 0. 2% mass fraction. Glass ceramics substrates were polished by SiO2 slurry which consisted of EDTA, (NH4) 2S208 and glycerol.The surface roughness of the glass ceramics substrates be- fore and after being polished was characterized by atomic force microscope (AFM).The result shows that the surface of the glass ceramics is very smooth, the surface roughness is 0. 12 nm after polishing, and the material removal rate reaches 72. 8 nm/min.
分 类 号:TH117.1[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171