双槽电火花线切割机床电气系统研制及工艺研究  

Development and research on the electrical system of the double groove WEDM machine tool

作　　者：彭世康[1] 杜轩宇 刘桂贤 张永俊[1] PENGShikang;UXuanyu;LIU Guixian;ZH ANG Yon gjun(School of Electro-mechanical Engineering , Guangdong University of Technology , Guangzhou 510006 , China)

机构地区：[1]广东工业大学机电工程学院,广州510006

出　　处：《中国科技论文》2017年第22期2585-2590,共6页China Sciencepaper

基　　金：高等学校博士学科点专项科研基金资助项目(20124420110003)

摘　　要：针对连杆裂解加工中双应力槽同步加工线切割机床结构和功能特点,设计了1套集成控制系统,在自行研制的电火花脉冲电源基础上,通过设计的人机界面实现对脉冲电源以及PLC的集成控制;介绍了机床的结构、运动控制模块、脉冲电源模块以及模块之间的集成控制。通过相关实验探讨了各参数对加工连杆裂解槽槽宽的影响。Aiming at the structure and function of double-stress slot synchronous machining wire-cutting machine tool in the crack processing of connecting rod,an integrated control system is designed.The system in the electric spark pulse power supply based on self-developed,achieved a HMI of pulse power supply and PLC control,to realize the integrated control of the machine tool.This article also describes the integrated control of machine tool structure,motion control modules,pulse power modules,and modules.Through the relevant experiments,the influence of each parameter on the slot width of the machining rod cracking tank was discussed.

关 键 词：连杆裂解工艺 电火花线切割 PLC 脉冲电源 集成控制 

分 类 号：TG484[金属学及工艺—焊接]