特低渗透及致密油藏低产井有杆泵采油参数优化方法  

Optimization of Oil Production Parameters of Rod Pump for Low-Productivity Wells in Ultra-Low Permeability and Tight Oil Reservoirs

作　　者：魏航信[1] 徐建宁[1] 赵亚杰 黄华 席文奎[1] 

机构地区：[1]西安石油大学机械工程学院,陕西西安710065 [2]陕西延长石油(集团)有限责任公司研究院,陕西西安710075

出　　处：《石油钻探技术》2017年第6期83-87,共5页Petroleum Drilling Techniques

基　　金：国家自然科学基金青年科学基金项目"通流力与小间隙力耦合高参数转子系统多学科协同设计建模及深知识获取研究"(编号:51405385);陕西省科技厅科技攻关项目"石油天然气井井下旋流装置研究"(编号:2014K07-20);延长油田股份有限公司科技项目"延长油田间抽井经济运行决策及控制优化技术研究与应用"(编号:290015153)联合资助

摘　　要：特低渗透油藏及致密油藏低产井产量低、生产成本高,确定合理的有杆泵采油参数对于提高低产井经济效益意义重大。为此,根据现场采集的井下压力数据,以油井内流量积分方程为基础,建立了采油参数优化模型,并在确保油井稳产的前提下,采用该模型对冲程、冲次、开井时间和关井时间等参数进行了优化,以实现节能降耗。延长油田七里村采油厂163口油井应用该方法进行开井时间优化后,节电率达25.9%。研究表明,采用流量积分方程建立的采油参数优化模型降低了以往方法存在的误差,优化了开井时间和关井时间,可以降低有杆泵系统的能耗,提高油田生产效益。It is difficult to optimize the working system of the rod pump due to low production and high energy costs of low-productivity wells in ultra-low permeability and tight oil reservoirs.By using bottomhole pressure data of those oil producers,the model for the optimization of oil production parameters is built on the basis of the flow integral equation.By adopting the model,some parameters such as stroke length,stroke frequency,production time and shut-in time can be optimized without compromising steady peak production of those oil producers.Optimization of these parameters can effectively save energy and reduce costs.Experiments in 163 oil wells in the Qilicun Oilfield showed that energy consumption can be reduced up to 25.9%through the application of the technique to optimize the production time.Research results show that optimal model for oil production parameter based flow integral equations can effectively eliminate errors from previously applied techniques.This technique can effectively reduce energy consumption of the rod pump system to enhance overall performances of the oilfield.

关 键 词：特低渗透油藏 致密油藏 有杆泵 采油参数"间抽周期 延长油田 

分 类 号：TE355.5[石油与天然气工程—油气田开发工程]