提高多通道数据采集系统采集精度的新方法  

An Original Method to Improve the Acquisition Precision of Multi-Channel Data Acquisition System

作　　者：甄国涌[1] 王晓丽 李辉景[1] ZHEN Guoyong1 , WANG Xiaoli2 ,LI Huijing1(1.National Key Laboratory for Electronic Measurement Technology ,North University of China, Taiyuan 030051, China; 2. JINXI Industries Group Co., LTD, Taiyuan 030027, Chin)

机构地区：[1]中北大学电子测试技术国家重点实验室,太原030051 [2]晋西工业集团有限责任公司,太原030027

出　　处：《电子器件》2017年第6期1478-1482,共5页Chinese Journal of Electron Devices

摘　　要：采集精度除了与ADC的实际转换位数相关的量化误差有关外,还会受到一些噪声和通道间信号串扰的影响。为提高采集精度,提出通过FPGA控制ADC对输入信号进行过采样,然后在FPGA内部实现抽取滤波和求平均值算法提高ADC转换分辨率。该方法用廉价的芯片实现了只有昂贵芯片才能得到的精度指标,并且易于实现。最后利用了直方图分析法对不同工作方式下所采集的数据进行了分析比较,结果显示该方法能够有效的减小系统的测量误差,提高了系统测量精度。Besides the related quantization error of ADC the actual conversion digit,the acquisition accuracy is also affected by the noise and channel signal crosstalk.In order to improve the acquisition system precision,oversampling the input signal by controlling ADC and realizing the extraction filtering and averaging algorithm for improving ADC conversion resolution within FPGA is proposed.The method is realized by using the cheap chip to achieve the precision index instead of the expensive chip,and the method is easy to implement.The histogram analysis was used to compare the collected data under different working modes.The results show that this method can reduce the measurement error of the system effectively and improve the measurement accuracy of the system.

关 键 词：信号串扰 采集精度 过采样 抽取滤波 求平均值 直方图 

分 类 号：TN702[电子电信—电路与系统]