离子液体亲水改性PVDF复合膜的制备与性能研究  

Preparation and Properties of 1-Butyl-3-Vinylimidazolium Bromide Modified Poly(vinylidene fluoride) Composite Films with Improved Hydrophilicity

作　　者：丁乙桐 张杨 孙树林[1] DING Yi-tong;ZHANG Yang;SUN Shu-lin(Research Center of the Ministry of Education for Synthesized Resin and Special Fiber, Changchun University of Technology, Changchun 130012, China)

机构地区：[1]长春工业大学合成树脂与特种纤维教育部工程研究中心,吉林长春130012

出　　处：《塑料工业》2018年第4期63-66,共4页China Plastics Industry

基　　金：吉林省科技发展计划项目(20170203010GX);吉林省教育厅"十三五"科学技术项目(JJKH20170551KJ)

摘　　要：以离子液体溴化1-丁基-3-乙烯基咪唑(ILs)为亲水性添加剂,甲基丙烯酸甲酯(MMA)为相容剂,将聚偏氟乙烯(PVDF)粉末溶于溶剂N,N-二甲基乙酰胺(DMAc)中,完全溶解后加入一定量的ILs和MMA单体进行原位聚合,应用相转换法制备PVDF复合膜。红外光谱测试结果表明ILs与MMA原位复合到PVDF基体中,ILs促进了PVDF中β结晶相生成。扫描电子显微镜分析证明PVDF与MMA-co-ILs之间热力学相容,没有发生相分离。接触角测试结果发现,ILs的引入显著提高了PVDF复合膜的亲水性。改性后的PVDF复合膜具有高的纯水通量和牛血清白蛋白(BSA)截留率,在水处理分离膜领域具有好的应用前景。Poly （ vinylidene fluoride） composite film with 1-butyl-3-vinylimidazolium bromide （ILs） as hydrophilic modifier and methyl methacrylate （MMA） as compatibilizer were prepared by the immersion precipitation process. Fourier transform infrared spectrometer （FTIR） results show that ILs and MMA are introduced into PVDF matrix successfully and ILs promotes the formation of β crystal. Scanning electron photomicrographs indicate that PVDF is miscible with MMA-co-ILs copolymer and no phase separation takes place. Water contact angle results show that the hydrophilicity of PVDF is enhanced significantly by ILs. The modified PVDF composite films display high pure water flux and bovine serum albumin （BSA） rejection, which shows excellent application prospect in water separation films.

关 键 词：离子液体 聚偏氟乙烯 复合膜 亲水化改性 

分 类 号：TU991.2[建筑科学—市政工程]