关节式坐标测量机静力结构误差分析  

Error Analysis of Static Structural for Articulated Arm Coordinate Measuring Machine

作　　者：冯超鹏 潘志康[1,2] 郭阳宽[1,2] 祝连庆[1,2] Feng Chaopeng;Pan Zhikang;Guo Yangkuan;Zhu Lianqing(Beijing Infor mation Science and Technology University, Beijing 100101, China)

机构地区：[1]北京信息科技大学光电测试技术北京市重点实验室 [2]北京信息科技大学光电信息与仪器北京市工程研究中心

出　　处：《工具技术》2018年第6期122-125,共4页Tool Engineering

基　　金：国家自然科学基金(51075038;51375057);国家重大科学仪器设备开发专项(2013YQ22089304);长江学者和创新团队发展计划(IRT1212);北京市教委面上项目(KM201411232004)

摘　　要：利用ANSYS Workbench软件对关节式坐标测量机的测量臂和关节分别进行了静力结构仿真。根据仿真结果分析和计算测量臂和关节受力产生形变时对关节式坐标测量机的最终测量结果的影响。研究结果表明,测量臂和关节受力产生的形变对关节式坐标测量机的最终测量结果产生的影响很小。Static structural simulation of an articulated arm coordinate measuring machine is carried out by using ANSYS Workbench software. The influences of the measuring results from measuring arms and joints are determined by analyzing and computing when they are deformation because of force. The results show that the influences on the final articulated measurement results of coordinate measuring machine of deformation of measurement arms and joints is small. These factors are very small when researching the error compensate of the articulated arm coordinate measuring machine.

关 键 词：有限元 关节式坐标测量机 静力分析 

分 类 号：TG83[金属学及工艺—公差测量技术] TH741[机械工程—光学工程]