超声振动锉削加工C_f/SiC复合材料试验研究  

Experimental Investigation on Filing in Ultrasonic Vibration Process of C_f/SiC Composites

作　　者：姜杰 万淑敏[1] 林彬[1] 李欢 Jiang Jie;Wan Shumin;Lin Bin;Li Huan(School of Mechanical Engineering,Tianjin University,Tianjin 300350,China;Capital Space Machinery Corporation,Beijing 100071,China)

机构地区：[1]天津大学机械工程学院,天津300350 [2]首都航天机械公司,北京100071

出　　处：《机械科学与技术》2018年第8期1246-1252,共7页Mechanical Science and Technology for Aerospace Engineering

基　　金：国家高技术研究计划863项目(2013AA040103)资助

摘　　要：碳纤维增强碳化硅陶瓷基(Cf/Si C)复合材料是一种应用普遍的纤维增强陶瓷基复合材料。针对Cf/Si C复合材料复杂曲面难加工问题提出了超声振动锉削加工方法,建立数学模型分析其加工机理,设计可行性试验验证表明超声振动锉削相对于传统锉削加工方法,可以降低锉削力,提高加工表面质量。利用单因素试验研究了刀具粒度、超声功率、径向锉削深度及水平进给速度对锉削力和被加工件表面粗糙度的影响。结果表明:锉削力随超声振动功率的增大而减小,随锉削深度和进给速度的增加而增大,与理论模型推导结论吻合;超声振动功率的增加可以提高工件表面质量,而锉削深度和进给速度的增加则会降低表面质量。Carbon fiber reinforced silicon carbide ceramic matrix composites（ Cf/SiC ） is a kind of widely used fiber reinforced ceramic matrix composite materials. In this paper, the ultrasonic vibration filing was brought up to solve the machining problem of Cf/SiC composites, the mathematical models were taken out to reveal the machining principle of ultrasonic vibration filing, and the feasibility experiment indicates that ultrasonic vibration filing is conducive to lower machining force and enhance surface quality comparing with traditional filing. The single-factor theoretical results; the increase in ultrasonic power enhances the surface quality, while the increase in filing depth and feed speed lowers the surface quality.

关 键 词：超声振动锉削 CF/SIC复合材料 数学模型 试验研究 

分 类 号：TH14[一般工业技术—材料科学与工程]