检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:贾云龙[1] 徐琳[1] 崔进[1] 严仁军[1] JIA Yunlong;XU Lin;CUI Jin;YAN Renjun(Key Laboratory of High Performance Ship Technology of Ministry of Education,Wuhan University of Technology,Wuhau 430063,China)
机构地区:[1]武汉理工大学高性能船舶技术教育部重点实验室,武汉430063
出 处:《武汉理工大学学报(交通科学与工程版)》2018年第3期483-486,共4页Journal of Wuhan University of Technology(Transportation Science & Engineering)
摘 要:为了控制某桥梁桩基施工的振动效应,在施工时,对桩基附近的地表的振动进行了实测,并基于莱茵达(PanTa)准则对测试结果的合理性进行了分析,同时给出了基于量纲分析的地表最大垂向位移的拟合公式.采用ABAQUS有限元软件建立了研究对象的有限元模型,通过与实测结果的对比,验证了该问题的有限模型的可靠性.对不同打桩深度的情况进行了有限元模拟,并将有限元计算值与拟合公式计算值进行比较.结果表明,有限元计算值与拟合公式计算值具有良好的一致性.In order to control the vibration effect of the punched pile construction,the surface vibration near the construction site was measured in the construction,and the rationality of test results was analyzed by the Reinda criterion.Meanwhile,the fitting formula of the maximum vertical displacement on the ground is derived according to dimension analysis.The finite element model was established with ABAQUS software and verified by compared with the test results.Then,the attenuation law of the ground vibrations in different depth of the pile was investigated with the finite element model and compared with the results of the fitting formula.The results show that the finite element calculation values have a good consistency with the fitting results.
关 键 词:打桩振动 莱茵达准则 量纲分析 最大垂向位移 衰减规律
分 类 号:U445.55[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.120