超声振动辅助电弧加工复合电源的研究  

Study on the Combined Pulse Power Source of Ultrasonic Vibration Assisted Arc Machining

作　　者：刘瑛 葛星 徐明刚 刘贵珍 赵洁明 LIU Ying;GE Xing;XU Minggang;LIU Guizhen;ZHAO Jieming(School of Mechanical and Material Engineering,North China University of Technology,Beijing 100043,China)

机构地区：[1]北方工业大学机械与材料工程学院,北京100043

出　　处：《电加工与模具》2018年第4期57-59,共3页Electromachining & Mould

基　　金：北京市自然科学基金资助项目(3162011)

摘　　要：从超声振动辅助电弧加工原理出发,通过对脉冲电源结构、超声发生结构的分析,将二者可共用的整流及控制部分结合,并利用模块化的方法分别对整流电路、超声电源主电路、脉冲电源主电路等关键模块进行设计,提出了能满足特种加工技术要求的复合电源,从而为复合电源理论提供技术及实验支持。This paper starts with the principle of ultrasonic vibration assisted arc machiningprocessing,through the analysis of the structure of the pulse power supply and the ultrasonic power,theparts of rectifier and contral circuit that can be shared was combined,using modular methods to designkey modules,such as,the rectifier circuit,the circuit of ultrasonic generator,the circuit of arcmachining pulse power supply and so on,a combined power supply which can meet the requirementsof non-traditional machining technology was proposed which provides technical and experiment supportin the theoretical of combined power supply.

关 键 词：超声振动辅助电弧加工 复合电源 超声发生器 

分 类 号：TG663[金属学及工艺—金属切削加工及机床]