仿真分析技术在橡胶弹簧硫化时间设计中的应用  

Application of Simulation Analysis Technology in Curing Time Design of Rubber Spring

作　　者：刘柏兵[1] 温泰斗 卜继玲[1] 谢彦飞[1] 李斌[1] LIU Baibing;WEN Taidou;B U Jiling;XIE Yanfei;LI Bin(Zhuzhou Times New Material Technology Co.,Ltd,Zhuzhou 412007,China)

机构地区：[1]株洲时代新材料科技股份有限公司,湖南株洲412007

出　　处：《橡胶工业》2018年第9期965-970,共6页China Rubber Industry

摘　　要：阐述传统计算法和仿真分析法计算橡胶制品正硫化时间的原理,以某橡胶辅助弹簧为研究对象,分别用两种方法计算其正硫化时间,并用溶胀指数和垂向刚度试验进行对比验证。结果表明,仿真分析法能较好地预测胶料硫化程度,可减少产品试模次数,降低研发成本。This paper briefly described the principle of traditional calculation method and simulation analysis method of the optimum cure time of rubber products. Taking a rubber auxiliary spring as the research object,the optimum cure time of the product was calculated by both methods,and the swelling index and vertical stiffness tests were used to verify simulation results. The results showed that the simulation analysis could predict the curing degree of rubber,and thus the test number and product development cost were reduced.

关 键 词：橡胶弹簧 硫化程度 正硫化时间 仿真分析 

分 类 号：TQ336.9[化学工程—橡胶工业] O241.82[理学—计算数学]