基于PC架构的动态红外目标图像智能生成研究  

Dynamic infrared target image intelligent generation based on PC architecture

作　　者：刘亚刚[1] 张启英[1] LIU Yagang, ZHANG Qiying(Changchun Guanghua University, Changchun 130033, China)

机构地区：[1]长春光华学院

出　　处：《激光杂志》2018年第11期79-82,共4页Laser Journal

基　　金：吉林省教育厅“十三五”产业化培育规划项目(No.吉教科合字[2015]第562号);吉林省教育厅“十三五”科学技术研究规划项目(No.JJKH20171027KJ)

摘　　要：针对当前红外目标图像生成方法得到图像的信噪比低和分辨率低,为此,在PC架构的基础上设计了动态红外目标图像智能生成方法。采用热网络法对动态红外目标温度,将动态红外目标分成多个相同尺寸的面元,计算每个面元中的温度;对收集得到的红外辐射进行滤波处理,根据红外目标温度的分布情况将红外探测器测得的灰度值显示出来,生成动态红外目标图像。实验结果表明,本文方法生成的动态红外目标图像的信噪比高、分辨率高。Aiming at the low signal to noise ratio and low resolution of the current infrared target image generation method,the intelligent generation method of dynamic infrared target image is designed on the basis of PC architecture.The dynamic infrared target temperature is applied to the dynamic infrared target temperature. The dynamic infrared target is divided into multi dimension surface element,and the temperature in each surface element is calculated. The infrared radiation collected is filtered. The gray value measured by the infrared detector is displayed according to the distribution of infrared target temperature,and the dynamic infrared is generated. Target image. The experimental results show that the SNR of the dynamic infrared target image generated by this method is high and the resolution is high.

关 键 词：PC架构 动态红外目标 图像生成软件 分辨率 

分 类 号：TN219[电子电信—物理电子学]