水产品加工废水处理工程  

The Wastewater Treatment Engineering in Aquatic Products Processing

作　　者：苗群[1] 刘志强[1] 贾军敦 赵健 孙文生 

机构地区：[1]青岛建筑工程学院环境工程系,青岛266033 [2]青岛经济技术开发区市政总公司,青岛266555 [3]文登市污水处理厂,烟台264400 [4]青岛京太置业有限公司,青岛266001

出　　处：《青岛建筑工程学院学报》2002年第3期38-40,共3页Journal of Qingdao Institute of Architecture and Engineering

摘　　要：采用接触氧化法处理水产品加工废水 .经过 2年运行 ,结果表明 :进水水质 COD<1 2 0 0 mg<l,SS<90 0 mg/l,其出水水质 COD<1 5 0 mg/l,SS<1 0 0 mg/l,满足《污水综合排放标准》中的二级排放标准 .该工艺运行稳定 ,产泥量少 。The contact oxidation method of wastewater treatment engineering in aquatic products processing is described in this paper. Results of 2 years running show that COD and SS concentration in influent was less than 1200 mg/L, and that in effluent was less than 150 mg/L and 100 mg/L. This result meets the secondary standard of integrated wastewater discharge standard of GB8978-1996. The project which can be managed easily runs steadily and yields little sludge.

关 键 词：废水处理 水产品加工 接触氧化 

分 类 号：X714[环境科学与工程—环境工程]