导弹天线罩专用修磨机床控制系统研究  

Research on control system for grinding machine tool of missile radome

作　　者：郭东明[1] 盛贤君[1] 徐志祥[1] 贾振元[1] 王晓明[1] 

机构地区：[1]大连理工大学机械工程学院,辽宁大连116024

出　　处：《大连理工大学学报》2002年第5期560-563,共4页Journal of Dalian University of Technology

基　　金：国家自然科学基金资助项目 (5 9975 0 16) ;国家"863"计划资助项目 (2 0 0 1AA 42 1170 )

摘　　要：以天线罩壁各处电厚度一致为目标对硬脆材料复杂形面天线罩进行精密测量和修磨 ,属于自由曲面的精密加工范畴 ,其测量和加工的控制系统将完全不同于普通的数控系统 .介绍了导弹天线罩精密测量和修磨加工系统方案设计中的关键技术及实现方法 ,阐明了基于双 CPU系统的开放型控制系统的控制原理、系统构成及抗干扰措施 ,并探讨了控制系统的软硬件开发技术 .调试结果表明 ,系统能够保证天线罩内廓的准确。To ensure the electric thickness coherence in any part of the missile radome which has a complicated shape and is made of hard and brittle material, it′s very important to precisely measure and machine the radome. The aim to accurately machine the radome is to make the collimation error of the missile minished. The control system of the measuring and machining equipment, which is specially designed and manufactured, is presented. The control principle, the system architecture and anti jamming methods of the open control system based on dual CPU, including the hardware system and the software system are discussed. The results show that the system can meet the requirements of rapid and precise measuring and machining for the inner contour of the radome.

关 键 词：导弹天线罩 修磨机床控制系统 数控机床 电厚度 精密加工 控制原理 

分 类 号：TJ760.3[兵器科学与技术—武器系统与运用工程] TG659[金属学及工艺—金属切削加工及机床]