一种异型管件内高压成形规律仿真研究  

Simulation study on the law of hydroforming of a kind of special shape tube

作　　者：秦文东[1] 林贤坤[2] QIN Wendong;LIN Xiankun(Youth League Committee,Guangxi University of Science and Technology,Liuzhou545006,China;School of Automobile and Traffic Engineering,Guangxi University of Science and Technology,Liuzhou545006,China)

机构地区：[1]广西科技大学校团委,广西柳州545006 [2]广西科技大学汽车与交通学院,广西柳州545006

出　　处：《广西科技大学学报》2018年第1期20-24,共5页Journal of Guangxi University of Science and Technology

基　　金：广西自然科学基金项目(2016GXNSFAA380211;2012GXNSFAA053208);广西柳州市科学研究与技术开发计划项目(2013G010601)资助

摘　　要：传统异型管件常采用板料成形生产,其缺点是成形工序多和模具结构复杂等.采用内高压成形生产异型管件,较传统工艺具有工艺简单和生产费用低,以及成形管件的强度与刚度高等优点.本文采用有限元软件AUTOFORM对异型管件开展先弯管后内高压成形的多道次数值模拟,研究液压加载方式、摩擦系数对其成形结果的影响规律,并确定合理的参数设置,并得到理想的数值模拟结果,为异型管件的实际内高压成形生产提供一定的指导作用.The special-shaped pipe is often produced by the sheet metal forming.This forming process has many shortcomings,such as multi-forming steps and more complicated die structures.The hydraulic pressure forming is used to produce the special-shaped pipe,which has the advantages of simple forming process,low production cost,and good product quality compared with the traditional forming process.In this paper,the finite element software Autoform is used to simulate the hydraulic pressure forming of the special-shaped pipe,study the influence rule of hydraulic loading mode and friction coefficient on the forming results,and determine the reasonable parameters toobtain the ideal numerical simulation results.This may give guidance on the production of the special-shaped pipeby the hydraulic pressure forming.

关 键 词：内高压成形 异型管件 数值模拟 

分 类 号：TG394[金属学及工艺—金属压力加工]