基于Sagnac光纤环和光限制器的模数转换器研究  

All-optical Analog-to-digital Converter Based on Sagnac Optical Loops and Optical Hard Limiters

作　　者：徐杰 李齐良[1] 陈浩文 李志鹏[1] XU Jie;LI Qiliang;CHEN Haowen;LI Zhipeng(School of Communication Engineering,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,China)

机构地区：[1]杭州电子科技大学通信工程学院,浙江杭州310018

出　　处：《杭州电子科技大学学报（自然科学版）》2018年第1期34-37,共4页Journal of Hangzhou Dianzi University：Natural Sciences

基　　金：浙江省自然科学基金资助项目(Y1110078)

摘　　要：介绍了一种基于Sagnac光纤环和光限制器的全光模数转换器的实现方式。在不考虑传输损耗的情况下,通过改变环的透射率使得每一级输出不同光功率的信号,这些不同的光功率看起来并没有规律可言,但在加入已设定好特定参数的光限制器之后,每一级的最终输出为0或Pth,对输出进行判决编码,输出数字信号。最终,实现了模数信号的转换。数值仿真研究表明,提出的全光模数转换方案所需的信号光功率低,方案简单易行。A novel way to achieve all-optical analog-to-digital converter which based on Sagnac optical loops and optical hard limiters is proposed and numerically demonstrated.In the absence of transmission losses taking into consideration,signals with different optical power are obtained in various output ports by the means of altering the transmittance of the Sagnac loops.It seems that there are no rules between the different optical power,nevertheless,things turn to be different under the circumstance that setting four optical hard limiters with fixed parameters after Sagnac optical loops.The ultimate output of each port is‘0’or‘P th’.Finally the outputs are coded,all-optical analog-to-digital converter achieves.Studies have shown the scheme proposed in this article have two obvious advantages that the signals’optical power required is rather low and the system can be achieved simply.

关 键 词：非线性光学 全光交换 模数转换器 Sagnac光纤环 光限制器 

分 类 号：TN[电子电信] TP[自动化与计算机技术]