半喂入四行花生联合收获机自动限深系统研制  

Development of automatic depth control device for semi-feeding four-row peanut combine harvester

作　　者：陈智锴 吴惠昌[1] 张延化[1] 彭宝良[1] 顾峰玮[1] 胡志超[1] Chen Zhikai;Wu Huichang;Zhang Yanhua;Peng Baoliang;Gu Fengwei;Hu Zhichao(Nanjing Research Institute of Agricultural Mechanization,Ministry of Agriculture,Nanjing 210014,China)

机构地区：[1]农业部南京农业机械化研究所,南京210014

出　　处：《农业工程学报》2018年第15期10-18,共9页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家重点研发计划"花生智能化高效联合收获关键技术与装备研发"(2016YFD0702102);国家现代农业花生产业技术体系收获机械化岗位(CARS-13-收获机械化岗位);中国农业科学院科技创新工程土下果实收获机械创新团队专项;中央级公益性科研院所基本科研业务费专项(S201803)

摘　　要：为提高4HLB-4型半喂入四行高效花生联合收获机智能化水平和作业顺畅性、降低收获时果实漏挖率和破损率,综合运用电子传感器技术、液压传动技术和微处理器控制技术设计了一套自动限深系统。该系统由限深仿形机构、挖掘深度调整机构、液压执行系统、单片机控制系统和控制软件组成。田间收获试验表明,自动限深系统工作稳定可靠,4HLB-4型半喂入四行花生联合收获机采用该装置后平均漏挖率为1.08%,平均破损率为0.94%,平均挖掘深度为123 mm。通过与人工限深收获试验结果对比发现平均漏挖率降低了2.13个百分点,平均破损率降低了1.4个百分点,平均挖掘深度偏差降低了11 mm,而且挖掘深度偏差更加稳定。该研究可为其他土下果实收获机械自动限深系统的研制提供参考。With the increase in labor costs and the development of peanut large-scale production in China,the demand for high-efficient peanut combine harvesters has become increasingly urgent.4HLB-4 type semi-feeding four-row peanut combine harvester can harvest 2 ridges(4 rows)at one time,whose productive efficiency is more than twice that of the existing semi-feeding two-row peanut combine harvester.At present,simple mechanical depth-control devices such as depth-control plates and depth-control wheels have been widely used on the semi-feeding peanut combine harvester,but in practice,it is found that simple mechanical depth-control devices are difficult to meet the requirements of precision and high efficiency.In the application of semi-feeding four-row peanut combine harvester,there are many problems such as slow response and poor accuracy,which easily result in high peanut leakage rate and breakage rate.In order to overcome the above problems,in this paper,a set of automatic depth control device for 4HLB-4 type semi-feeding four-row peanut combine harvester was designed by adopting electronic sensor technology,hydraulic driving technology and microprocessor control technology comprehensively.The device was composed of a depth-control profiling mechanism,an excavation depth adjustment mechanism,a hydraulic execution system,a microprocessor control system and a control software.The working principle of the device is as follows:The depth-control profiling mechanism senses the change of the ridge top undulation,converts the fluctuating changing amount into the angle information,and then transmits it to the angle encoder.The angle encoder converts the angle information into a digital signal and transmits it to the controller.Based on the compiled program,the controller analyzes the angle signal and then outputs the solenoid valve control signal to open the hydraulic cylinder to drive oil circuit.The hydraulic cylinder drives the excavation depth adjustment mechanism to adjust the height of the excavating shovel.At the same

关 键 词：农业机械 传感器 控制 花生联合收获机 自动限深 智能化 

分 类 号：S225.73[农业科学—农业机械化工程]