基于虚拟迭代方法的后扭力梁载荷谱提取  

Load Spectrum Extraction of Rear Torsion Beam Based on Virtual Iteration Method

作　　者：龚春辉 葛文韬 段龙杨 王祖建 Gong Chunhui;Ge Wentao;Duan Longyang;Wang Zujian(Product Development&Technical Center,Jiangling Motors Co,Ltd.,Jiangxi Nanchang 330000;Jiangxi Engineering Research Center of Passenger Car Structure Design,Jiangxi Nanchang 330000)

机构地区：[1]江铃汽车股份有限公司产品开发中心,江西南昌330000 [2]江西省乘用车结构设计工程研究中心,江西南昌330000

出　　处：《汽车实用技术》2018年第17期54-57,共4页Automobile Applied Technology

摘　　要：建立了整车动力学模型,以试验场采集的轮心六分力为激励信号,以实测轴头加速度和弹簧位移为目标信号,运用虚拟迭代方法反求出轮胎接地点处的位移激励,驱动整车模型进行仿真分析,从时域、损伤域、幅值域和频率域多方面对仿真输出结果与实测信号进行了对比分析,结果表明仿真结果与实测信号对标良好,提取了后扭力梁连接点的载荷谱,为后期零部件的疲劳分析提供了输入条件。The full vehicle model was built and wheel center six-component forces which has been acquired from proving ground are taken as excitation signal.The hub acceleration and spring displacement are taken as target signal.The displacement excitation of tire contact patch was back-calculated by applying virtual iteration method,the simulation analysis of full vehicle model was motived,and comparison analysis of simulation result and measurement signal were conducted from multi-aspects,including time domain,damage domain,amplitude domain and frequency domain,the analysis result has shown that simulation result and measurement signal were calibrated well.The load spectrum at interface points of rear twist beam has been extracted,which was used as the input of automobile parts fatigue analysis.

关 键 词：整车动力学模型 轮心六分力 虚拟迭代 载荷谱 

分 类 号：U467[机械工程—车辆工程]