检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:尹泉[1,2] 傅鹤林 刘运思[3,4] 岳健[3,4] 郭志广[4] YIN Quan;FU Helin;LIU Yunsi;YUE Jian;GUO Zhiguang(School of Civil Engineering,Central South University,Changsha 410075,China;School of Civil Engineering,Hunan City University,Yiyang 413000,China;Key Laboratory of Geotechnical Engineering Stability Control and Health Monitoring of Hunan Province,Hunan University of Science&Technology,Xiangtan 411201,China;School of Civil Engineering,Hunan University of Science&Technology,Xiangtan 411201,China)
机构地区:[1]中南大学土木工程学院,湖南长沙410075 [2]湖南城市学院土木工程学院,湖南益阳413000 [3]湖南科技大学岩土工程稳定控制与健康监测省重点实验室,湖南湘潭411201 [4]湖南科技大学土木工程学院,湖南湘潭411201
出 处:《中南大学学报(自然科学版)》2018年第9期2301-2307,共7页Journal of Central South University:Science and Technology
基 金:国家自然科学基金资助项目(51538009;51578550;51704109)~~
摘 要:肋梁-桩-锚支护结构有别于传统桩锚支护结构,前者在传统排桩上增设了竖向肋梁。为解决肋梁桩锚支护结构中锚索拉力计算问题,以变形协调理论为基础,根据肋梁、桩和锚索这3种支护结构在共点时水平位移相等,构建肋梁-桩-锚索共同支护作用下锚索拉力计算理论模型,并将该模型应用于某深基坑工程的锚索拉力计算。研究结果表明:基于该理论模型求解得到的锚索拉力小于传统桩锚支护结构锚索拉力,与工程实际结果更加接近;由于有肋梁存在,支护结构整体刚度提高,支护结构的受力分布更加合理,锚索内力更小,节约了工程造价,同时提高了支护结构的整体稳定性。The rib-beam-pile-anchor support structure is different from the traditional pile anchor support structure,with the former adding the vertical rib beam to the traditional row pile.In order to solve the rib-beam pile anchor support structure,according to the equal horizontal displacement at the combined point of the rib beam,pile and anchor,the tension calculation model was built for the rib-beam-pile-anchor support structure based on the deformation coordination theory.The model was applied to calculate the anchor cable tension in a deep foundation pit engineering.The results show that with the theoretical model,the anchor cable tension is less than that of the traditional anchor support structure,and it is also closer to the actual situation of the engineering.Because of the existence of rib beam,the overall stiffness of the structure is improved,the supporting structure stress distribution is more reasonable,the prestress is smaller,the construction cost is lower,and the overall stability of the supporting structure is improved.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.90