径向磁力轴承多因素耦合研究  

Research on Multi-Factor Coupling of Radial Magnetic Bearings

作　　者：楼英邦 张小玉 方玺 吕泳 吴华春[2] LOU Yingbang;ZHANG Xiaoyu;FANG Xi;Lv Yong;WU Huachun(Department of Engineering Structure and Mechanics,School of Science,Wuhan 430070,China;School of Mechanical and Electronic Engineering,Wuhan University of Technology,Wuhan 430070,China;Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics,Wuhan 430070,China)

机构地区：[1]武汉理工大学,理学院工程结构与力学系,武汉430070 [2]武汉理工大学,机电工程学院,武汉430070 [3]新材料力学理论与应用湖北重点实验室,武汉430070

出　　处：《轴承》2018年第10期18-23,29,共7页Bearing

基　　金：国家自然科学基金项目(61573012)；中央高校基本科研业务费专项资金项目(WUT:2016IA004)

摘　　要：采用理论计算与数值模拟相结合的方法,研究纯电磁磁力轴承的耦合问题,讨论转子存在偏心下的径向磁力轴承耦合情况。结果表明:耦合力的理论值较仿真值的相对误差随转子偏心距和工作电流的增大而增大,当偏心距为±0. 3 mm时,相对误差达到25%,理论计算公式不再适用;当偏心距为±0. 2 mm时,理论值和仿真值吻合较好。The coupling of pure electromagnetic bearings is studied by using theoretical calculation method and numerical modeling method,and the coupling of radial magnetic bearings is discussed when the rotor has eccentricity.The results show that the relative error between theoretical value and numerical value of coupling force is increased with the increase of eccentricity of rotor and working current.The relative error at the eccentricity of±0.3 mm reaches 25%,and the theoretical calculation formula is no longer applicable.The theoretical value is in good agreement with simulation value when the eccentricity is±0.2 mm.

关 键 词：径向磁力轴承 耦合 数值模拟 偏心 

分 类 号：TH133.3[机械工程—机械制造及自动化] O241.82[理学—计算数学]