PMN-0.33PT晶体单模切割方向的研究  

Study on the Single-modes Cut Directions of PMN-0.33PT Crystal

作　　者：张鑫[1] 周国香[1] 黎娇 李佳[1] ZHANG Xin;ZHOU Guo-xiang;LI Jiao;LI Jia(School of Science,Hebei University of Technology,Tianjin 300401,China)

机构地区：[1]河北工业大学理学院,天津300401

出　　处：《人工晶体学报》2018年第10期2058-2063,2069,共7页Journal of Synthetic Crystals

基　　金：国家自然科学基金(61671199)

摘　　要：采用数值计算的方法研究了PMN-0. 33PT晶体的单模切割方向。通过求解绕X,Y,Z轴旋转的压电增劲克里斯托弗方程,计算出了晶体的单模切割方向以及该方向的机电耦合系数和偏振态。结果表明,PMN-0. 33PT晶体只有一个可用切向即Z切。该切向可获得理想的纯纵模,机电耦合系数为0. 469,波速为5217. 5 m/s。该研究结果对PMN-0. 33PT晶体在压电换能器中的应用有理论指导作用。The single-mode cutting direction of the PMN-0.33PT crystal was studied by using a numerical calculation method.The single mode cutting direction and the electromechanical coupling coefficient as well as the polarization state of PMN-0.33PT crystal were calculated by solving the stiffened Christoffel equation when the crystal was rotated around the X,Y,and Z axis,respectively.The results show that only Z-cut is a useful single-mode cutting direction for the PMN-0.33PT crystal.It is a pure longitudinal mode.The electromechanical coupling coefficient is 0.469 and the wave speed is 5217.5 m/s.The results of this study provide theoretical guidance for the application of PMN-0.33PT crystals in piezoelectric transducers.

关 键 词：PMN-0.33PT晶体 三方相 坐标旋转 机电耦合系数 

分 类 号：TN384[电子电信—物理电子学] O738[理学—晶体学]