检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郭楚佳 张爱民[1] 张杭[2] 任志刚[1] 张蕾[3] GUO Chujia;ZHANG Aimin;ZHANG Hang;REN Zhigang;ZHANG Lei(School of Electronic and Information Engineering,Xi’an Jiaotong University,Xi’an 710049,China;School of Electrical Engineering,Xi’an Jiaotong University,Xi’an 710049,China;School of Electronics and Information,Xi’an Polytechnic University,Xi’an 710048,China)
机构地区:[1]西安交通大学电子与信息工程学院,西安710049 [2]西安交通大学电气工程学院,西安710049 [3]西安工程大学电子信息学院,西安710048
出 处:《西安交通大学学报》2018年第12期38-43,105,共7页Journal of Xi'an Jiaotong University
基 金:国家自然科学基金资助项目(51607133)
摘 要:针对双向接口变换器在交流侧三相不平衡状态下出现的直流侧电压振荡型波动、正序电压相位检测困难、有功功率和无功功率计算不准确的问题,提出了一种直接功率模型预测控制方法。首先,利用瞬时电压、电流向量建立系统瞬时功率向量预测模型,以省略功率计算的锁相环节,避免电压相位检测不准确对控制性能的影响;其次,为功率向量的实部和虚部分别设计参考量,抑制实部中负序分量引起的二倍频功率波动,以避免直流侧电压振荡型波动;最后,以功率向量的实部和虚部作为控制单元,分别设计目标函数,消除两者间的相互影响,同时,在目标函数中设计开关频率约束项,使得被控器件开关频率可调。仿真和实验结果表明,所提控制方法可实现无功功率参考变化时,有功功率不受影响,相比于传统PWM方法,有功功率超调量下降了约74%,且该方法可保证系统全功率因数运行,系统直流侧无振荡型波动。A model predictive control strategy is proposed to solve the inevitable DC voltage oscillation,inaccuracy phase information of positive voltage,unclear calculation of the active and reactive power of the bidirectional interfacing converters in three-phase unbalanced condition.Firstly,an instantaneous power vector predictive model is built by using instantaneous voltage and current vector to omit the phase-lock-loop and to avoid the effect of inaccurate voltage phase detection;Secondly,power references are designed for the real and imaginary components of the power vector,respectively,to restrain the double-frequency power caused by the negative sequence component and to eliminate the DC voltage oscillation;Finally,objective functions are designed for the real and the imaginary components of power vector,respectively,to avoid the interaction between them,and a switching frequency limitation part is included in objective functions to make the switching frequency tunable.Simulation and experimental results show that the active power is not influenced by the change of reactive power.A comparison with the traditional PWM method shows that the proposed method reduces the overshoot of active power by about 74%,the power factor is regulated to 1,and the DC voltage oscillation is eliminated.
关 键 词:交直流混合微网 双向接口变换器 模型预测控制 三相不平衡
分 类 号:TP23[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.191.169.138