微型断路壳上料控制系统设计  

Design of Miniature Breaking Circuit Feeding Control System

作　　者：赵勇 周志峰 肖鹏 ZHAO Yong;ZHOU Zhifeng;XIAO Peng(School of Mechanical and Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China)

机构地区：[1]上海工程技术大学机械与汽车工程学院,上海201620

出　　处：《轻工机械》2018年第6期53-56,共4页Light Industry Machinery

摘　　要：针对微型断路器装配过程中存在生产效率低、一致性差等缺点,提出了基于PLC控制器的微型断路壳上料控制系统。课题组设计了上料控制系统的机械结构,介绍了上料机构的组成和连接方式;采用伺服电机实现上料机构的精确控制;设计了上料控制系统的硬件组成以及工作原理;采用以太网的通信方式提高数据的传输速率;设计了控制系统的上位机显示界面。控制系统运行结果表明,断路壳上料机运行稳定、结构简单、成本低,有效提高了整个装配生产线的装配效率。Aiming at the shortcomings of low production efficiency and poor consistency in the assembly process of miniature circuit breakers,a feeding control system for miniature circuit breakers based on PLC controller was proposed.The mechanical structure of the feeding control system was designed by the research group,the composition and connection mode of the feeding mechanism were introduced;precise control of feeding mechanism was realized through servo motor control mode.The hardware composition and operation principle of the feeding control system were designed and using Ethernet to improve data transmission rate;the upper computer display interface of the control system was designed.The operation of the control system shows that the breaker feeder is stable in operation,simple in structure and low in operating cost,can effectively improve the assembly efficiency of the entire assembly line.

关 键 词：上料控制系统 微型断路壳 伺服电机 装配生产线 PLC控制器 以太网 

分 类 号：TP271[自动化与计算机技术—检测技术与自动化装置]