检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:甘世明[1,2] 韩永全[1] 刘鹏程 包晓艳[1,2] Gan Shiming;Han Yongquan;Liu Pengcheng;Bao Xiaoyan(Material Foraning Key Laboratory, Inner Mongolia University of Technology, Hohhot 010051 , China;College of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot 010051, China)
机构地区:[1]内蒙古工业大学材料成型重点实验室,呼和浩特010051 [2]内蒙古工业大学机械工程学院,呼和浩特010051
出 处:《焊接》2018年第12期7-11,65,共6页Welding & Joining
基 金:国家自然科学基金资助项目(51665044);内蒙古自治区博士研究生科研创新项目资助(B20151012810;B20161012804Z)
摘 要:为分析铝合金VPPA-MIG复合焊接过程中的电信号,在铝合金7A52复合焊接试验过程中,利用VPPA-MIG复合焊接电信号检测系统分别检测VPPA电弧与MIG电弧电信号,将检测到的电信号经小波降噪处理后进行功率谱分析。通过15组试验的电信号功率谱分析发现MIG电弧电信号中总有0 Hz直流分量存在,而且其功率占整个信号功率比例(功率占比)较大。当VPPA电弧正反极性变化频率恒为100 Hz时,MIG电流越大,MIG电弧电信号的主要高频成分及其谐波分量也越大;焊接速度变化会影响MIG电弧电信号的主要高频成分及其谐波分量的功率占比,而VPPA电流变化不会对MIG电弧电信号的主要高频成分产生影响。VPPA电弧电信号的主要频率成分总包含0 Hz直流分量和100 Hz及其各次谐波分量,且不受自身电弧电流、MIG电弧电流以及焊接速度的影响。In order to analyze the characteristics of electrical signals in VPPA-MIG hybrid welding of Aluminum alloy. The VPPA arc electric signals and the MIG arc electric signals were acquired by the VPPA-MIG hybrid welding signal Acquisition system,and the power spectrum of the acquisited electrical signals was analyzed after the wavelet de-noising. The DC component is found in the MIG arc electric signals by the power spectrum analysis of the 15 groups of experiment,and its’ power accounts for a large proportion of the power of all frequency components. When the varying frequency of positive and negative polarity of VPPA arc is constant at 100 Hz,main high frequency components of MIG arc electric signals and their harmonic components get greater with the increment of the current of MIG arc. The change of welding speed can affect the power ratio of main high frequency components in MIG arc electric signals and their harmonic components,while the change of the current of VPPA arc cannot affect the main high frequency components of MIG arc. Main frequency components of VPPA arc signals contain DC component,100 Hz and its sub harmonic components,which are not affected by VPPA arc current,MIG arc current and welding speed.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.14.77.105