花键搓齿机设计与分析  

Design and Analysis of Involute Spline Cold Roll Forming Machine

作　　者：王艳阳 王勇[1] 黄俊杰[1] 张晔[1] 金平 周庆成 Wang Yanyang;Wang Yong;Huang Junjie;Zhang Ye;Jin Ping;Zhou Qingcheng(School of Mechanical Engineering,HeFei University of Technology,Hefei 230009,China;Anhui Lecn Mechanical Equipment Co.,Ltd.,Chizhou 247100,China)

机构地区：[1]合肥工业大学机械工程学院,安徽合肥230009 [2]安徽力成机械装备公司,安徽池州247100

出　　处：《机械传动》2019年第2期166-170,共5页Journal of Mechanical Transmission

基　　金：安徽省重大科技专项(16030901018)

摘　　要：针对国内花键搓齿机设计制造过程依靠经验数据与设计支撑理论不充分的现状,以立式花键搓齿机为例,研究其设计分析方法。在搓制成形力计算基础上,给出了立式花键搓齿机的总体布局和床身结构设计;依据模拟仿真获得的成形力数据,并在对滑台、丝杠的工作情况和受力分析基础上,设计了传动系统关键部件;对立式搓齿机进行了强度和模态分析,得到了机床的静动态特性。At present,the design and manufacture of the domestic spline cold roll forming machine are mainly based on the experimental data,and theoretical studies are still insufficient.Taking the vertical spline cold roll forming machine for example,the design and analysis methods are studied.Based on the calculation of the forming force,the overall layout and machine tool body structure of vertical spline cold roll forming machine are given.According to the forming force data obtained by simulation as well as the working conditions and force analysis for the sliding table and screw,the key parts of the transmission system are designed.The static and dynamic characteristics of the machine tool are also analyzed by strength and modal analysis for the vertical spline cold roll forming machine.

关 键 词：花键 搓齿机 设计 强度 模态 分析 

分 类 号：TG502[金属学及工艺—金属切削加工及机床]