TSC型动态无功补偿半物理仿真系统设计  

Design of TSC dynamic reactive power compensation hardware-in-the-loop simulation system

作　　者：生龙 暴正阳 陆锋[2] SHENG Long;BAO Zhengyang;LU Feng(College of Engineering,China University of Petroleum-Beijing at Karamay,Karamay 834000,China;College of Automation Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 211106,China)

机构地区：[1]中国石油大学(北京)克拉玛依校区工学院,新疆克拉玛依834000 [2]南京航空航天大学自动化学院,江苏南京211106

出　　处：《电焊机》2019年第2期24-29,共6页Electric Welding Machine

基　　金：中国石油大学(北京)克拉玛依校区科研启动基金(RCYJ2018A02-001)

摘　　要：针对在研究冲击性负荷的无功补偿策略时面临的实验条件苛刻、成本高、危险性大等问题,提出了一种基于QuaRC平台和DSP控制器的TSC型动态无功补偿半物理仿真系统。根据典型冲击性负荷——点焊机的实际工况,在仿真环境中建立了实验对象,选取了一种无功补偿策略并在DSP控制器中实现。仿真结果符合实际情况,验证了本系统设计方案的合理性。In view of problems such as harsh condition,high-cost and high-risk in experiments in the research of reactive power compensation for impact load,a TSC dynamic reactive power compensation hardware-in-the-loop simulation system based on QuaRC platform and DSP is proposed.According to working characteristics of typical impact load,spot-welders,experimental subject is established in the simulation environment,and a reactive power compensation strategy is selected and implemented in the DSP.Simulation result conforming with actual conditions,the reasonability of the design of the system is verified.

关 键 词：冲击性负荷 点焊机 晶闸管投切电容器 无功补偿 半物理仿真系统 

分 类 号：TG438.2[金属学及工艺—焊接]