Underwater explosion effects of 60 mm H.E. mortar bomb on a cylindrical concrete structure-PIT  

作　　者：Faruk Razic Burek Miralem 

机构地区：[1]Defense Technologies Department,University of Sarajevo [2]Faculty of Mechanical Engineering,University of Sarajevo [3]Pretis d.d. Igmanska bb

出　　处：《Defence Technology（防务技术）》2019年第1期65-71,共7页Defence Technology

摘　　要：PIT tests are usually performed when a mass distribution of High Explosive(H.E) projectile fragments is required. This paper shows the underwater detonation effects of 60 mm, M90 H.E. mortar bomb filled with Comp. B on cylindrical concrete structure(concrete pipe closed at one end-similar to a PIT test)which is 2 m high(inner height) with inner diameter of also 2 m. Thickness of both wall and bottom of a pipe is 0.35 m. Detailed characteristics of concrete which is used for manufacturing of a pipe are specified. Mortar bomb is submerged directly in to the water(no free airspace around the bomb) with the nose pointing to the bottom of a pipe. Number and mass of fragments after detonation are presented by table and photographs. Fragments of dummy fuze, through which blasting cap was protruded, are collected and reassembled to form a shape of a fuze after detonation where expanding of fuze material due to a detonation products is visualized. After underwater detonation, detonation of the same mortar bomb is performed in an empty pipe and the effects of this kind of detonation are observed. Distance at which fragments generated from submerged mortar bomb will not reach concrete pipes wall is also determined.PIT tests are usually performed when a mass distribution of High Explosive(H.E) projectile fragments is required. This paper shows the underwater detonation effects of 60 mm, M90 H.E. mortar bomb filled with Comp. B on cylindrical concrete structure(concrete pipe closed at one end-similar to a PIT test)which is 2 m high(inner height) with inner diameter of also 2 m. Thickness of both wall and bottom of a pipe is 0.35 m. Detailed characteristics of concrete which is used for manufacturing of a pipe are specified. Mortar bomb is submerged directly in to the water(no free airspace around the bomb) with the nose pointing to the bottom of a pipe. Number and mass of fragments after detonation are presented by table and photographs. Fragments of dummy fuze, through which blasting cap was protruded, are collected and reassembled to form a shape of a fuze after detonation where expanding of fuze material due to a detonation products is visualized. After underwater detonation, detonation of the same mortar bomb is performed in an empty pipe and the effects of this kind of detonation are observed. Distance at which fragments generated from submerged mortar bomb will not reach concrete pipes wall is also determined.

关 键 词：Underwater explosion MORTAR BOMB Blast Comp B DUMMY FUZE FRAGMENTS 

分 类 号：TJ[兵器科学与技术]