大量程在线式粉尘浓度监测系统设计  

Design of on-line monitoring system for dust concentration with large range

作　　者：赵欣然 李群 王卫东[1] 徐志强[1] 鲁恒润 ZHAO Xinran;LI Qun;WANG Weidong;XU Zhiqiang;LU Hengrun(School of Chemical and Environmental Engineering,China University of Mining and Technology (Beijing),Beijing 100083,China;Center for Major Hazards Installation Monitoring and Control,Accident Investigation andIdentification,China Academy of Safety Science and Technology,Beijing 100012,China)

机构地区：[1]中国矿业大学(北京)化学与环境工程学院,北京100083 [2]中国安全生产科学研究院重大危险源监控与事故调查分析鉴定技术中心,北京100012

出　　处：《中国测试》2019年第4期80-84,128,共6页China Measurement & Test

基　　金：国家自然科学基金面上资助项目(51574251)

摘　　要：针对高浓度可燃性粉尘存在爆炸的风险,该文基于光透射原理设计一套大量程在线式粉尘浓度监测系统,通过对透射光信号的采集反演出粉尘的浓度信息。系统整体包含6个单元模块,实现对信号的采集、转换、显示和控制,其中单片机选用性能优越的STM32,上位机程序采用NI公司的虚拟仪器软件LabVIEW进行设计。采用全反射的方式将测量激光束进行反射,解决传统光透射法由于光程长而导致测量距离长的问题,有效缩短仪器长度,扩大适用范围。与固定容积的标定装置进行比对,结果表明该监测系统能够对10～100 g/m^3粉尘浓度范围进行有效监测,量程内绝对误差最大为-4.2 g/m^3。In order to monitor the concentration of flammable dust. An on-line monitoring system of dust concentration with large range based on transmission method was researched and developed, which calculate dust concentration by detecting the transmitted light intensity. The system contains six modules to achieve signal acquisition, conversion, display and control. In this system selects STM32 as main controller, and applies virtual instrument software LabVIEW as the upper software designing platform. Using all reflective parts, the length of instrument has been shorten nearly half. The experiment proves that system can measure the dust concentration in time, which range is 10 -100 g/m^3 and absolute error is below 4.2 g/m^3.

关 键 词：粉尘浓度 在线监测 透射法 全反射 STM32 

分 类 号：X831[环境科学与工程—环境工程] TP212.9[自动化与计算机技术—检测技术与自动化装置]