不同初始相位角同步转子密炼机混炼流场的有限元模拟分析  

Finite Element Simulation Analysis on Mixing Flow Field of Mixer with Synchronous Rotor and Different Initial Phase Angle

作　　者：汪传生[1] 张磊 翟天剑 张鲁琦 WANG Chuansheng;ZHANG Lei;ZHAI Tianjian;ZHANG Luqi(Qingdao University of Science and Technology,Qingdao 266061,China)

机构地区：[1]青岛科技大学机电工程学院

出　　处：《橡胶工业》2019年第6期471-474,共4页China Rubber Industry

基　　金：国家自然科学基金资助项目(51073009);教育部新世纪优秀人才支持项目(NCET-10-0202)

摘　　要：基于粘弹性流体模拟软件POLYFLOW对不同初始相位角同步转子密炼机的混炼流场进行三维动态模拟,采用粒子轨迹示踪法并结合统计学后处理软件POLYSTAT对粒子运动轨迹进行统计分析,以粒子分布状态、粒子拉伸长度自然对数平均值和平均混合效率为特征参数对流场进行定量分析和对比。结果表明,采取0°初始相位角布置的同步转子密炼机的混炼分散效果最好。Based on viscoelasticity fluid simulation software POLYFLOW,the mixing flow field of the mixer with synchronous rotor and different initial phase angle was 3D dynamically simulated,the particle motion trajectory was analyzed statistically using particle trajectory tracing method and statistical postprocessing software POLYSTAT,and the flow field was quantitatively analyzed and compared by taking the particle distribution,mean value of the natural logarithm of particle stretch length and average mixing efficiency as characteristic parameters. The results showed that the best mixing and dispersion effects were obtained with an initial phase angle of 0°.

关 键 词：密炼机 同步转子 初始相位角 混合效率 粒子轨迹示踪法 有限元模拟 

分 类 号：TQ330.43[化学工程—橡胶工业] O241.82[理学—计算数学]