检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:沈志军 于渊博 秦万信 李亚平 Shen Zhijun;Yu Yuanbo;Qin Wanxin;Li Yaping(Xianyang BOMCO Steel Tube & Wire Rope Co.,Ltd., Xianyang 712000,China)
机构地区:[1]咸阳宝石钢管钢绳有限公司
出 处:《金属制品》2019年第4期13-20,23,共9页Metal Products
摘 要:钢丝绳使用过程中,为保证使用安全,均会限制钢丝绳不同使用工况条件下的最多可见断丝数。通过微分几何建立二次螺旋钢丝在钢丝绳中的空间坐标方程;借助研究二次螺旋钢丝曲率随其绕钢丝绳轴线旋转角的变化周期,从图像上、理论上解释了钢丝绳使用规范规定同向捻时允许最多可见断丝数与交互捻时存在大约1∶2这一相对固定的比例关系的合理性。During the use of wire rope, in order to ensure safety of wire rope, the maximum number of broken wire under different operating conditions of wire rope will be limited. The spatial coordinate equation of the secondary spiral wire in the wire rope is established by differential geometry. By studying the changing period of curvature of the secondary spiral steel wire with its rotation angle around the axis of the wire rope, from the picture and theory, the wire rope usage specification stipulates that the maximum number of visible breakages is allowed to be explained by the existence of a relatively fixed ratio of approximately 1∶ 2 in different lay type.
关 键 词:钢丝绳 交互捻 同向捻 捻距 捻角 曲率 微分几何
分 类 号:TG356.45[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222