复杂多针脚异型元件的视觉精密定位研究  

Research on Precise Pin Position and Inspection of Odd-shaped Component with Multi-leads Based on Machine Vision

作　　者：邝泳聪[1] 陈响 欧阳高飞[1] Kuang Yongcong;Chen Xiang;Ouyang Gaofei(School of Mechanical and Automotive Engineering,South China University of Technology, Guangzhou 510640,China)

机构地区：[1]华南理工大学机械与汽车工程学院

出　　处：《计算机测量与控制》2019年第9期218-222,共5页Computer Measurement &Control

基　　金：广东省自然科学基金项目(2015A030310415)

摘　　要：现阶段异型插件机的视觉系统大部分采用底部相机的针脚定位方法,通常难以区分针脚和元件本体,影响定位方法的稳定性;针对这一问题,目前已存在一种基于旋转立体视觉的针脚定位方法,该方法对于针脚数目较少的元件定位效果良好,可靠性和效率较高;基于该研究,此次提出一种多针脚异型元件的针脚定位方法;该方法首先求取无遮挡拍摄角度区间,从而获得无重叠针脚图像;然后通过空间矩方法获得每幅图像的针脚亚像素边缘,根据相机成像模型得到各边缘点的反投影射线方程;最后结合旋转立体视觉的标定得到元件针脚在虚拟成像平面的包络图,从而获取针脚的偏移和转角。At present, most of the vision systems of the plug-in machine adopt the pin positioning method using bottom-camera, and it is often difficult to distinguish the pins and the component body, which affects the stability of the positioning method. For this problem, currently there is a pin positioning method based on rotational stereo vision, having good positioning effect on components with a small number of stitches, as well as high reliability and efficiency. Based on this research, a pin positioning method for multi-lead components was proposed. The method firstly obtains an unobstructed shooting angle interval, thereby getting images without overlapping pins;Then, obtaining the sub-pixel edge of each image, and the projection line equation of each edge point is obtained according to the camera imaging model;Finally, through the calibration of the rotating stereo vision, the envelope diagram of the component pins in the virtual imaging plane is obtained, thereby obtaining the offset and the rotation angle of the stitches.

关 键 词：旋转立体视觉 无遮挡角度区间 多针脚元件 反投影线 包络图 

分 类 号：TP391.41[自动化与计算机技术—计算机应用技术]