红外成像制导防空导弹半实物仿真方法研究  

Research on Hardware-in-the-Loop Simulation Test for Infrared Imaging Guidance Air Defanse Missile

作　　者：王超磊[1,2] 杜渐 石建华[1] WANG Chaolei;DU Jian;SHI Jianhua(Science and Technology on Special System Simulation Laboratory,Beijing Simulation Center Beijing 100854,China;Beijing Complex Product Advanced Manufacturing Engineering Research Center,Beijing Simulation Center,Beijing 100854,China)

机构地区：[1]北京仿真中心航天系统仿真重点实验室,北京100854 [2]北京仿真中心北京市复杂产品先进制造系统工程技术研究中心,北京100854

出　　处：《上海航天》2019年第4期65-70,共6页Aerospace Shanghai

摘　　要：红外成像制导控制半实物仿真系统通过构建导弹飞行过程中红外目标场景、角运动等模拟环境,将制导控制系统实物接入仿真系统并构建实时仿真回路,对制导控制回路的性能和产品特性进行验证。针对防空导弹制导控制系统仿真,提出了一种红外成像半实物仿真方法,给出了仿真系统设计方案,构建了验证系统。试验结果表明该系统能够有效模拟红外成像制导导弹运行状态和目标环境。随着仿真系统硬件水平的不断提升,该方法能够应用于更多红外成像武器装备的试验验证中。By simulating the infrared/motion environments for the air defense missile,the hardware-in-the-loop simulation system is able to put onboard equipment into a real-time simulation control loop to test the performance of the infrared imaging guidance and control system.This paper focuses on the research of the hardware-in-the-loop simulation test for infrared imaging guidance system of air defense missile,proposes a simulation system design scheme and builds a test simulation system.Simulation experiments are carried out to verify that this system is able to simulate the air defense missile state and the target/environment effectively.With the hardware development of the simulation system,the proposed method can be applied to more infrared imaging guidance weapons.

关 键 词：红外成像 制导控制 半实物仿真 目标场景 防空导弾 

分 类 号：TP391.9[自动化与计算机技术—计算机应用技术]