Theoretical Model and Experimental Research on Friction and Torque Characteristics of Hydro-viscous Drive in Mixed Friction Stage  

作　　者：Hongwei Cui Qiliang Wang Zisheng Lian Long Li 

机构地区：[1]College of Mechanical and Vehicle Engineering,Taiyuan University of Technology,Taiyuan 030024,China [2]Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment,Taiyuan University of Technology,Taiyuan 030024,China

出　　处：《Chinese Journal of Mechanical Engineering》2019年第5期59-69,共11页中国机械工程学报（英文版）

基　　金：Supported by National Natural Science Foundation of China(Grant Nos.51805351,U1810123)

摘　　要：The hydro-viscous drive(HVD)has been widely used in fan transmission in vehicles,fans,and scraper conveyors for step-less speed regulation or soft starting.In the mixed friction stage,the contact,friction,and torque characteristics of friction pairs are very complex and change at any time.The characteristics of the frictional and hydrodynamic lubrication states were studied in order to calculate and predict the friction and torque characteristics of the friction pairs in the mixed friction stage.The fluid torque was calculated by applying the average shear stress model and the load-carrying capacity of asperity was determined on the basis of the fractal contact theory.In addition,the contact friction coefficient of the friction pairs was taken into consideration and measured by using the MM1000-Ⅲfriction and wear testing machine.The asperity friction torque and total torque in the mixed friction stage were obtained and finally,the test rig for the torque characteristics was set up.The results show that the contribution to the total torque is shared by the oil film and the asperity friction.The friction coefficient decreases sharply at first and then increases with a change in the relative rotational speed,following the Stribeck curve closely,and the contact frictional coefficient slowly decreases with increase in the pressure between the friction pairs.The torque between the friction pairs is provided by the asperity friction,and the torque due to the oil film reduces to zero.When the thickness of the oil film is small,a major contribution to the total torque is due to the asperity friction.The total torque also increases with the decrease in the film thickness ratio.Therefore,by theoretical analysis and experimental verification,the torque of the friction pairs in the mixed friction stage can be accurately calculated using the average shear stress model and asperity friction torque model.The hydro-viscous drive(HVD) has been widely used in fan transmission in vehicles,fans,and scraper conveyors for step-less speed regulation or soft starting.In the mixed friction stage,the contact,friction,and torque characteristics of friction pairs are very complex and change at any time.The characteristics of the frictional and hydrodynamic lubrication states were studied in order to calculate and predict the friction and torque characteristics of the friction pairs in the mixed friction stage.The fluid torque was calculated by applying the average shear stress model and the load-carrying capacity of asperity was determined on the basis of the fractal contact theory.In addition,the contact friction coefficient of the friction pairs was taken into consideration and measured by using the MM1000-Ⅲ friction and wear testing machine.The asperity friction torque and total torque in the mixed friction stage were obtained and finally,the test rig for the torque characteristics was set up.The results show that the contribution to the total torque is shared by the oil film and the asperity friction.The friction coefficient decreases sharply at first and then increases with a change in the relative rotational speed,following the Stribeck curve closely,and the contact frictional coefficient slowly decreases with increase in the pressure between the friction pairs.The torque between the friction pairs is provided by the asperity friction,and the torque due to the oil film reduces to zero.When the thickness of the oil film is small,a major contribution to the total torque is due to the asperity friction.The total torque also increases with the decrease in the film thickness ratio.Therefore,by theoretical analysis and experimental verification,the torque of the friction pairs in the mixed friction stage can be accurately calculated using the average shear stress model and asperity friction torque model.

关 键 词：Hydro-viscous drive(HVD) MIXED FRICTION STAGE TORQUE characteristics Contact FRICTION coefficient 

分 类 号：TG1[金属学及工艺—金属学]