弓形座热力耦合有限元分析  

Finite Element Analysis of Slider under Thermal Mechanical Coupling

作　　者：胡海明[1] 李新荣[1] 王芹 叶杨 HU Haiming;LI Xinrong;WANG Qin;YE Yang(Qingdao University of Science and Technology,Qingdao 266061,china)

机构地区：[1]青岛科技大学机电工程学院

出　　处：《橡胶工业》2019年第12期936-938,共3页China Rubber Industry

摘　　要：建立弓形座力学模型,利用Abaqus软件进行有限元分析。结果表明:弓形座材料、上盖闭滑板结构、弓形座角度均对弓形座受力状况产生影响。弓形座材料由QT450-10球墨铸铁改为40Cr合金调质钢时,弓形座最大等效应力变化不大,但竖直方向最大位移减小;上盖闭滑板由梯形改为扇形时,弓形座最大等效应力减小29%;弓形座角度由32°改为25°时,弓形座最大等效应力增大25%。The mechanical model of slider was established,and the finite element analysis was carried out by Abaqus software.The results showed that the materials of the slider,the structure of the top cover and the angle of the slider all affected the stress state of the slider.When the material of slider was changed from QT450-10 ductile iron to tempered 40Cr alloy steel,the maximum equivalent stress of the slider changed little,but the maximum vertical displacement decreased.When the top cover was changed from trapezoid to sector form,the maximum equivalent stress of the slider decreased by 29%.When the angle of the slider was changed from 32°to 25°,the maximum equivalent stress of the slider increased by 25%.

关 键 词：弓形座 热力耦合 应力-应变 有限元分析 

分 类 号：TQ330.4+1[化学工程—橡胶工业] O241.82[理学—计算数学]