检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨春旭[1,2] 王瑞和 韩来聚[2] 薛启龙 刘庆龙[2] Yang Chunxu;Wang Ruihe;Han Laiju;Xue Qilong;Liu Qinglong(Petroleum Engineering College of China University of Petroleum,Qingdao Shandong 266580,China;Shengli Petroleum Engineering Co.Ltd,Drilling Technology Research Institute,Donying Shandong 257017,China;School of Engineering and Technology,China University of Geosciences,Beijing 100083,China)
机构地区:[1]中国石油大学(华东)石油工程学院,山东青岛266580 [2]胜利石油工程有限公司钻井工艺研究院,山东东营257017 [3]中国地质大学(北京)工程技术学院,北京100083
出 处:《石油化工高等学校学报》2019年第6期90-96,共7页Journal of Petrochemical Universities
基 金:国家自然科学基金项目(51704264);国家重大专项“复杂地层钻井提速提效关键工具与装备研究”(2016ZX05021-003)
摘 要:作为尖端自动化钻井新技术的旋转导向钻井技术已经成为复杂超深钻井和大位移井的必备技术。为打破国外垄断,胜利石油钻井院开发了基于捷联式算法的稳定平台。利用伺服技术控制导向机构动作的执行,并对上传、下行通讯系统进行了优化改进,从而实现捷联式动态推靠旋转导向系统的自主研发;同时设计了一套工具井上测试平台,实现对其推靠性能的测试,验证设计的准确性,并在此基础上进行了4口井的现场实验。结果表明,该系统的最大造斜能力可达到6.43(°)/30 m,具备了良好的实用性、稳定性和可靠性。主要论述了捷联式旋转导向设计过程和思路,介绍了其主要结构和设计关键点,并对井上测试平台和井下实验进行了描述,对旋转导向系统技术进一步的优化改进有一定的指导作用。As a new technology for cutting-edge automated drilling, Rotary steer drilling technology has become an indispensable technology for complex ultra-deep drilling and large-displacement wells. To break the foreign monopoly, Shengli drilling institute has developed a stable platform based on the Strapdown algorithm. The servo technology is used to control the action implement of the guidance mechanism, and the optimization and improvement of the uploading and downlink communication system are optimized and improved, so as to realize the independent research and development of the strap-down dynamic push-to-rotate guiding system. At the same time a set of tool well test platform is designed to test its pushing performance and verify the accuracy of the design. On this basis filed test have been done in four wells, and the results show that the system’s deflection ability can reach 6.43 °/30 m, with good practicability, stability and reliability. This paper mainly discusses the design process and ideas of strap-down rotary steering, introduces its main structure and design key points, and describes the uphole test platform and downhole experiments. The content of this paper summarizes the development of strap-down rotary guiding technology, and plays a positive guiding role for the further optimization and improvement of rotary guiding system technology.
关 键 词:捷联式 旋转导向 动态推靠式 地面测试 现场试验
分 类 号:TE242[石油与天然气工程—油气井工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.71