基于具有自主知识产权的软件SPSDP 06的轴系校中计算  

Shafting Alignment Calculation Based on SPSDP 06 SoftwareWith Self-Owned Intellectual-Property Rights

作　　者：王建政 周庆波 刘张超 Wang Jianzheng;Zhou Qingbo;Liu Zhangchao(Shanghai Marine Diesel Engine Research Institute,Shanghai 200090;Wuhan University of Technology,Hubei Wuhan 430063;National Engineering Laboratory for Marine and Ocean Engineering Power System,Shanghai 201108)

机构地区：[1]七一一研究所,上海200090 [2]武汉理工大学,湖北武汉430063 [3]船舶与海洋工程动力系统国家工程实验室,上海201108

出　　处：《柴油机》2020年第2期8-12,共5页Diesel Engine

基　　金：国家自然科学基金重点项目(51839005)。

摘　　要：针对某含齿轮箱的高速主推进轴系,基于具有自主知识产权的软件SPSDP 06进行轴系校中计算,并将计算结果与CCS的COMPASS计算结果进行对比分析。结果表明:对于相同的轴系,两种软件的计算结果的相对误差小于5.8%;自主研发的SPSDP 06轴系校中软件已具有工程应用价值。在此基础上给出了轴系现场安装的一些建议。Shafting alignment calculation based on SPSDP 06 software with self-owned intellectual-property rights was carried out on a high speed main propulsion shafting with gear box.The calculation results were compared with the results using COMPASS developed by CCS.It showed that with the same shaf-ting,the relative error of the calculation results with the two different software was less than 5.8%.The self-developed SPSDP 06 shafting alignment software was thus proved to have the value of engineering application.Some suggestions are given on in-field installation of shafting.

关 键 词：轴系 校中 软件 安装 

分 类 号：U664.21[交通运输工程—船舶及航道工程]