基于ANSYS的径向驻波型超声波电机设计与分析  

Design and Analysis of Radial Standing Wave Type Ultrasonic Motor Based on ANSYS

作　　者：蒋春容[1] 夏凯 陆旦宏[1] JIANG Chunrong;XIA Kai;LU Danhong(School of Electric Power Engineering,Nanjing Institute of Technology,Nanjing 211167,China)

机构地区：[1]南京工程学院电力工程学院,江苏南京211167

出　　处：《电机与控制应用》2020年第4期54-58,共5页Electric machines & control application

基　　金：国家自然科学基金项目(51507076);江苏省“六大人才高峰”高层次人才项目(KTHY-040)。

摘　　要：研究了一种采用径向振动的驻波型超声波电机。首先分析了电机的结构,然后利用有限元分析软件ANSYS建立定子有限元模型,基于该模型分析了压电陶瓷的结构尺寸对定子振动特性的影响,进而确定了定子的结构尺寸,并进一步分析了定子的瞬态响应特性。最后根据理论分析结果试制了样机,对样机进行了试验测试,测试结果表明,所设计的电机具有较好的输出性能。A standing wave type ultrasonic motor working on radial vibration mode is studied.Firstly,the structure of the motor is analyzed.Secondly,a finite element model of the stator is built with finite element analysis software ANSYS.The impacts of piezoelectric ceramic structural parameters on the vibration characteristics of the stator are investigated based on the finite element model.The structural parameters of the stator is determined.Transient response of the stator is further analyzed.Finally,a prototype motor is manufactured according to the theoretical results.Experimental tests are conducted on the prototype motor.The test results show that the designed motor has good output performances.

关 键 词：超声波电机 径向振动 驻波型 结构尺寸设计 试验测试 

分 类 号：TM35[电气工程—电机]