空间激光通信中复合跟踪技术研究  

Research on composite tracking technology in space laser communication

作　　者：王伟 刘云清[1] 董岩[1] 赵馨[1] WANG Wei;LIU Yun-qing;DONG Yan;ZHAO Xin(School of Electronics and Information Engineering,Changchun University of Science and Technology,Changchun 130022,China;Graduate School,Changchun University of Science and Technology,Changchun 130022,China)

机构地区：[1]长春理工大学电子信息工程学院,吉林长春130022 [2]长春理工大学研究生学院,吉林长春130022

出　　处：《激光与红外》2020年第4期403-406,共4页Laser & Infrared

基　　金：中国航空研究院航空科学基金项目(No.201758Q8001)资助。

摘　　要：空间激光通信前提是信标光束的精确对准,因此复合轴的跟踪技术是关键,粗精复合的耦合性问题成为研究重点。设计了一套基于单探测器复合轴的跟踪系统,对其原理及关键技术进行阐述,采用粗跟踪配合补偿精跟踪偏转量的方法,解决了耦合性问题,并完成伺服控制系统设计。搭建实验系统对跟踪性能及指标进行验证,实验结果表明,在±0.25°@0.1Hz扰动下系统跟踪误差控制在1个像素之内,跟踪误差均方根为0.13,结合实际条件知,系统像元角分辨率22μrad,故系统整体跟踪精度优于3μrad,可实现对信标光的精确跟踪,满足空间激光通信的应用需求。The premise of space laser communication is the precise alignment of the beacon beam.Therefore,the tracking technology of the composite axis is the key,and the coupling problem of coarse and fine composite becomes the research focus.A tracking system based on single detector composite axis is designed.The principle and key technology are expounded.The method of coarse tracking and compensation to compensate the deflection amount is used to solve the coupling problem and complete the servo control system design.The experimental system is built to verify the tracking performance and indicators.The experimental results show that the system tracking error is controlled within 1 pixel under±0.25°@0.1Hz disturbance,and the tracking error RMS is 0.13.The element angle resolution is 22μrad,so the overall tracking accuracy of the system is better than 3μrad,which can accurately track the beacon light and meet the application requirements of space laser communication.

关 键 词：空间激光通信 粗精复合 单探测器 跟踪精度 

分 类 号：TN929.1[电子电信—通信与信息系统]