水基油墨清洗剂的研究及应用  

Research and Application of Water-based Ink Cleaning Agent

作　　者：王艳辉 李兰辉 钟云飞[2] WANG Yan-hui;LI Lan-hui;ZHONG Yun-fei(MYS Group Co.,Ltd.,Shenzhen 518107,China;School of Packaging and Material Engineering,Hunan University of Technology,Zhuzhou 412007,China)

机构地区：[1]美盈森集团股份有限公司,广东深圳518107 [2]湖南工业大学包装与材料工程学院,湖南株洲412007

出　　处：《包装工程》2020年第9期130-135,共6页Packaging Engineering

基　　金：深圳市科技创新委员会项目(JSGG20170822100757740)。

摘　　要：目的为提高水基油墨清洗剂的环保性和稳定性,展开对水基油墨清洗剂的研究。方法分析清洗剂的清洗机理,选择多种表面活性剂进行复配实验,确定表面活性剂复配组成的配方及比例,利用配比实验确定助洗剂和防锈剂等助剂制备的工艺参数,再通过表面活性剂和助剂复配实验,优化油墨清洗剂的设计配方,确定水基油墨清洗剂的制备工艺路线。结果获得了水基油墨清洗剂的组成配方,水的质量为82 g,脂肪醇聚氧乙烯醚硫酸盐(AES)的质量为9 g,脂肪醇聚氧乙烯醚(AEO-9)的质量为2 g,氯化钠的质量为2 g,硅酸钠的质量为1 g,苯并三氮唑的质量为1 g,尿素的质量为2 g,三乙醇胺的质量为1 g。结论所配置的油墨清洗剂的净洗力、腐蚀性和防锈性等已达到规定标准,可制备性能稳定的水基油墨清洗剂。The work aims to carry out a research on water-based ink cleaning agent, in order to improve its environmental protection and stability. On the basis of analyzing the cleaning mechanism of the cleaning agent, a variety of surfactants were selected for compounding experiment to determine the surfactant compounding formula and proportion. The ratio experiment was used to determine the preparation process parameters of auxiliary agents, such as detergent and rust inhibitor. Then, the design formula of ink cleaning agent was optimized to determine the preparation process route of water-based ink cleaning agent, through the compounding experiment of surfactant and auxiliary agent. The optimal formula was obtained: 82 g water, 9 g AES, 2 g AEO-9, 2 g sodium chloride, 1 g sodium silicate, 1 g benzotriazole, 2 g urea and 1 g triethanolamine. The cleaning force, corrosion and rust resistance of the ink cleaning agent reach the specified standards, so that the water-based ink cleaning agent with stable performance can be prepared.

关 键 词：水基油墨清洗剂 乳化剂 表面活性剂 印刷油墨 

分 类 号：TS206[轻工技术与工程—食品科学]