检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘宇鑫 张盛泉[1,3] 郭永刚 游庆瑜[1,3,4] 郝天珧[1,3,4,5] LIU Yu-xin;ZHANG Sheng-quan;GUO Yong-gang;YOU Qing-yu;HAO Tian-yao(Key Laboratory of Petroleum Resources Research,Institute of Geology and Geophysics,Chinese Academy of Sciences,Beijing 100029,China;State Key Laboratory of Acoustics,Institute of Acoustics,Chinese Academy of Science,Beijing 100190,China;Institute of Earth Science,Chinese academy of Sciences,Beijing 100029,China;University of Chinese Academy of Science,Beijing 100049,China;Key Laboratory of Submarine Geoscience,State Ocean Administration,Second Institute of Oceanography,Ministry of Natural Resources,Hangzhou 310012,China)
机构地区:[1]中国科学院地质与地球物理研究所,中国科学院油气资源研究重点实验室,北京100029 [2]中国科学院声学研究所声场声信息国家重点实验室,北京100190 [3]中国科学院地球科学研究院,北京100029 [4]中国科学院大学,北京100049 [5]海底科学重点实验室,自然资源部第二海洋研究所浙江,杭州310012
出 处:《地球物理学进展》2020年第3期1168-1174,共7页Progress in Geophysics
基 金:国家重大仪器设备专项“海底地震采集站接驳装置研制与接驳技术研究”(2013YQ12035702)资助.
摘 要:组合式海底地震采集站GOBS(Group Ocean Bottom Seismometer)为一种自容式海底地震采集站组网设备,为实现长期留海作业,其采集站的电路时钟源通常采用低功耗石英晶振.现有设备水下无法进行精确对钟,长时间留海作业将产生时钟时间漂移累积而导致多道GOBS数据难以处理.针对这一问题,本文提出了一种水声时钟同步方法,其基本原理是利用分数阶傅里叶变换对线性调频信号的能量聚集性精确估计信号到达时刻,通过水声时标与GOBS间多次的周期性单向消息传递得到GOBS本地时间与水声时标标准时间的映射关系,实现GOBS的时钟同步.本方法考虑到水下资源受限的现实条件,在控制同步消息开销和计算开销的前提下,采取水声时标向GOBS的单向消息广播模式,减少GOBS功耗,延长了GOBS的可持续工作时间.同时实现了时钟同步的目标,将所有GOBS的本地时间同步到一个全局时间上去,避免了节点时钟漂移的累积,提高了时钟精度.通过数值仿真和水池测试验证表明,本方法具有计算复杂度低、时钟同步精度高、能耗小的特点,具有较好的实用价值.GOBS(Group Ocean Bottom Seismometer)is a kind of self-contained ocean seismic acquisition station that works in networking.In order to achieve long-term sea-holding operations,the clock source of GOBS usually uses a low-power quartz crystal resonator.Because existing equipments cannot perform accurate time under water,long-term sea-holding operations will result in an increase in time drift and cause multi-channel GOBS data difficult to process.Aiming at this problem,this paper proposes a hydroacoustic clock synchronization method.The basic principle is to use the fractional Fourier transform to accurately estimate the signal arrival time of the chirp signal,and obtain the mapping relationship between GOBS local time and the accurate time through the periodic one-way message transmission between the transmitter and the GOBSs and then realize the clock synchronization.Under the premise of controlling the synchronization message overhead and computational overhead,the method takes into account the real conditions of underwater resource limitation,and adopts the one-way message broadcasting mode from the transmitter to the GOBSs to reduce the power consumption of the GOBSs and prolong the GOBSs sustainable working time.At the same time,the goal of clock synchronization is achieved,and the local time of all GOBSs have been synchronized to a global time,which avoids the accumulation of nodes clock drift and improves the clock precision.The results of numerical simulation and pool experiment show that the method has the characteristics of low computational complexity,high clock synchronization accuracy and low energy consumption and has good practical value.
关 键 词:线性调频信号 分数阶傅里叶变换 信号到时估计 时钟同步
分 类 号:P631[天文地球—地质矿产勘探] P738[天文地球—地质学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15