Al-Zn-Ni-Mg-Cu变形铝合金的共晶强化效应  

Eutectic Strengthening Effect of Al-Zn-Ni-Mg-Cu Aluminum Alloy

作　　者：陈大辉 陈铮[1] 聂景江[2] 洪晓露[2] 刘永强[2] 任丽宏 侯林冲[2] 徐英[2] Chen Dahui;Chen Zheng;Nie Jingjiang;Hong Xiaolu;Liu Yongqiang;Ren Lihong;Hou Linchong;Xu Ying(State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi’an 710072,China;The Ningbo Branch of Ordnance Science Institute of China,Ningbo 315103,China)

机构地区：[1]西北工业大学凝固技术国家重点实验室,陕西西安710072 [2]中国兵器科学研究院宁波分院,浙江宁波315103

出　　处：《稀有金属材料与工程》2020年第7期2319-2325,共7页Rare Metal Materials and Engineering

基　　金：宁波市自然科学基金(2017A610040)。

摘　　要：在Al-Zn-Mg-Cu变形铝合金中加入质量分数3%~5%的Ni元素,通过共晶反应形成了大量的Al3Ni相,除MgZn2相时效强化以外还增加了Al3Ni相的弥散强化作用。Ni含量的增加既改善了Al-Zn-Mg-Cu变形铝合金的铸造性能和可焊性,又提高了抗拉强度和屈服强度。Al-Zn-Ni-Mg-Cu铝合金较佳的成分为Al-5.6Zn-3.5Ni-2Mg-1Cu,其抗拉强度、屈服强度和断后伸长率分别为650 MPa、572 MPa和7.5%,焊接接头的抗拉强度和断后伸长率分别为323 MPa、2%。随着强度的增加,Al3Ni相由界面撕裂转变为自身断裂,Ni含量的增加提高了Al3Ni的强化效果,但不宜超过共晶点。降低Al3Ni相的长径比能抑制Al3Ni相的自身断裂,Al3Ni相的均匀分布能阻碍再结晶晶粒的异常长大。3 wt%~5 wt%Ni element was added to the Al-Zn-Mg-Cu deformed aluminum alloy,and a large amount of Al3Ni phases were formed by eutectic reaction.Therefore,the particle strengthening effect of the Al3Ni phases was also found besides MgZn2 aging strengthening.The increase of Ni content not only improves the casting performance and weldability of the Al-Zn-Mg-Cu deformed aluminum alloy,but also increases the tensile strength and yield strength.The preferred composition of Al-Zn-Ni-Mg-Cu aluminum alloy is Al-5.6Zn-3.5Ni-2Mg-1 Cu.Its tensile strength,yield strength and elongation are 650 MPa,572 MPa and 7.5%,respectively.The tensile strength and elongation of its welded joint are 323 MPa and 2%,respectively.With the increase of Zn content,the Al3Ni phase changes from interfacial tear to self-fracture.With the increase of the Ni content,the strengthening effect of Al3Ni phases is improved,but the content of Ni cannot exceed the eutectic point.Decreasing the aspect ratio of Al3Ni particles helps to suppress the self-fracture of Al3Ni phases.Uniform distribution of Al3Ni phase helps to prevent the abnormal growing of recrystallized grains.

关 键 词：Al-Zn-Ni-Mg-Cu铝合金 Al3Ni 共晶强化效应 力学性能 可焊性 

分 类 号：TG146.21[一般工业技术—材料科学与工程]