基于5G网络的无人驾驶飞行器控制系统设计  

Design of Unmanned Aerial Vehicle Control System Based on 5G Network

作　　者：谭秦红[1] Tan Qinhong(School of Computer and Communication Engineering,Tongren Polytechnic College,Tongren Guizhou 554300,China)

机构地区：[1]铜仁职业技术学院信息工程学院,贵州铜仁554300

出　　处：《信息与电脑》2020年第16期67-68,共2页Information & Computer

摘　　要：原有的无人驾驶飞行器控制系统中由于通信方式设置不当,导致飞行器的信号接收时间较长,从而会影响无人驾驶飞行器的控制效果.为此,设计基于5G网络的无人驾驶飞行器控制系统.硬件选用无刷直流电机作为系统的驱动电机并配置相应的传感器.软件设定通信信号放大系数,实现对5G通信网络的信号控制,并构建系统测试环节.经测试发现,此系统的信号接收时间较短且稳定.In the original unmanned aerial vehicle control system,due to the improper communication mode setting,the aircraft signal reception time is longer,which affects the unmanned aerial vehicle control effect.To this end,an unmanned aerial vehicle control system based on a 5G network is designed.The hardware selects the brushless DC motor as the drive motor of the system and configures the corresponding sensors.The software sets the communication signal amplification factor to realize the signal control of the 5G communication network.Build a system test,the signal reception time of this system is short and stable.

关 键 词：5G网络 无人驾驶飞行器 控制器 自主飞行控制 

分 类 号：V249.122[航空宇航科学与技术—飞行器设计]