检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘颖彬 廖少明[1] 陈立生 柳毅强 顾颖成 LIU Yingbin;LIAO Shaoming;CHEN Lisheng;LIU Yiqiang;GU Yingcheng(Department of Geotechnical Engineering,Tongji University,Shanghai 200092,China;Shanghai Urban Construction Municipal Engineering Co.,Ltd.,Shanghai 200065,China)
机构地区:[1]同济大学地下建筑与工程系,上海200092 [2]上海城建市政工程(集团)有限公司,上海200065
出 处:《隧道建设(中英文)》2020年第10期1462-1470,共9页Tunnel Construction
基 金:上海科委"科技创新行动计划"资助项目(17DZ1203804,18DZ1205404,19511100802)。
摘 要:为研究盾构下穿对地铁双圆隧道变形的影响,以上海地铁14号线盾构下穿地铁6号线双圆隧道为工程背景,对双圆隧道在前后2次盾构下穿过程中的变形进行实测分析。结果发现:1)盾构穿越导致双圆隧道发生竖向隆起变形和双线差异变形产生的断面扭转变形,断面扭转变形引起的轨道变形难于控制;2)双圆隧道竖向变形为隆起变形,其变形分布形态随切口位置变化而变化,穿越后交叉点附近呈现特有的"驼峰状"隆起分布;3)2次穿越扰动与叠加效应显著,表现为隧道隆起变形时间延长,累计量增大,2次穿越引起的最大变形位置发生改变;4)双圆隧道的扭转变形随切口位置呈波浪形动态变化,出现多个拐弯点,对其环缝受力与变形十分不利,第2次穿越时的扭转变形较第1次穿越有所减小;5)双圆隧道断面最不利扭转出现时刻不同于隧道最大变形出现时刻,且扭转最不利位置与最大隆沉发生位置产生了错位;6)盾尾注浆对双圆隧道变形的控制效果明显,但将导致双圆隧道的扭转变形增大。In order to study the influence of metro shield undercrossing tunneling on the deformation of double-O-tube(DOT)metro tunnel,the characteristics of the deformation of the DOT tunnel during Shanghai Metro Line No.14 crossing underneath DOT tunnel on Line No.6 twice are analyzed by in-situ measurement.The results show that:(1)The shield undercrossing causes the vertical uplift deformation of the DOT tunnel and the torsional deformation of the cross-section,and it is difficult to control the track deformation caused by the cross-section torsion deformation.(2)The vertical deformation of the DOT tunnel is uplift deformation,the tunnel deformation is closely related to the incision position,and the curve near the intersection shows a hump-shape after undercrossing.(3)The secondary crossing disturbance and superposition effect are significant,which are manifested as the extension of tunnel uplift deformation time,the increase of the accumulated deformation,and the change of the maximum deformation position during the two undercrossing processes.(4)The torsional deformation of DOT tunnel shows a wavy dynamic change distribution with the location of the shield tunnel incision,and there are multiple turning points,which is disadvantageous to the stress and deformation of the tunnel segment joint.Besides,the torsional deformation of the second undercrossing is smaller than that of the first undercrossing.(5)The time that the most unfavorable cross-section torsion of the DOT tunnel appears is different from that of the maximum deformation of the tunnel,and the most disadvantageous torsional position and the position where the maximum tunnel uplift occurs locate in different areas.(6)The grouting at the shield tail is effective in controlling the deformation of the DOT tunnel,but it leads to the increase of the torsional deformation of the tunnel.
关 键 词:地铁盾构 现场实测 双圆隧道 断面扭转 相对扭转
分 类 号:U45[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.46