检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:龚国栋 丁超 李宏亮 张稳军[2,3,4] Gong Guodong;Ding Chao;Li Hongliang;Zhang Wenjun(Tianjin Binhai New Area Construction&Investment Group Co.,Ltd.,Tianjin 300459,P.R.China;Key Laboratory of Coast Civil Structure Safe of Ministry of Education,Tianjin University,Tianjin 300354,P.R.China;School of Civil Engineering,Tianjin University,Tianjin 300354,P.R.China;Key Laboratory of Urban Underground Engineering of Ministry of Educationt Beijing Jiaotong University,Beijing 100044,P.R.China)
机构地区:[1]天津滨海新区轨道交通投资发展有限公司,天津300459 [2]天津大学滨海土木工程结构与安全教育部重点实验室,天津300354 [3]天津大学建筑工程学院,天津300354 [4]北京交通大学城市地下工程教育部重点实验室,北京100044
出 处:《地下空间与工程学报》2020年第5期1563-1568,1579,共7页Chinese Journal of Underground Space and Engineering
基 金:天津市建设系统科学技术项目发展计划(2016-17);城市地下工程教育部重点实验室(北京交通大学)开放基金(TUE2017-05)。
摘 要:针对盾构管片接缝密封垫单一型与复合型密封垫断面,利用非线性有限元软件ABAQUS对盾构隧道密封垫防水进行数值模拟研究,分别对单一型密封垫和复合型密封垫在不同张开量条件下的防水性能进行量化分析,并通过复合型密封垫遇水膨胀橡胶块的膨胀作用进行分析。研究表明:(1)随着接缝张开量不断增大,复合密封垫的防水性能逐渐由密封垫压缩产生的接触应力转化为遇水膨胀橡胶的膨胀作用产生的膨胀应力,对比单一型密封垫,其具有二次防水效果;(2)增大复合密封垫遇水膨胀橡胶块厚度与宽度有利于提高密封垫二次防水性能,其防水性能在允许张开量范围内和允许张开量范围外分别增长39%和117%左右,同时考虑应力松弛因素,需要对遇水膨胀橡胶块几何截面进行合理取值。In the paper,specific to shield segment joint sealing gasket single type and compound type sealing gasket section,the non-linear finite element software ABAQUS was used to simulate the waterproofing of shield tunnel sealing gasket,and quantitative analysis of waterproof performance of single and composite gaskets under different opening conditions was carried out respectively, and expansion effect of compound gasket encountering water expanding rubber block was analyzed. Conclusions drawn are as following: 1) with the joint opening increasing,the waterproof performance of composite gaskets is gradually transformed from contact stress caused by compression of gaskets to expansion stress caused by expansion of rubber encountering water,compared with single type gasket,and it has secondary waterproofing effect;2) increasing the thickness and width of the expanded rubber block when the composite gasket meets water is beneficial to improving the secondary waterproofing performance of the gasket. Its waterproofing performance increased by 39% and 117% respectively in the allowable opening range and outside the allowable opening range,considering the stress-relaxation factors,and it is necessary to select the geometric section of water-swelling rubber block reasonably.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49