环境老化对底部填充胶性能的影响  

The Effect of Environmental Aging for Performance of Underfill

作　　者：杨媛媛 李刚 朱朋莉[1,2] 张超 吴厚亚[1,2] 彭小慧 孙蓉 汪正平 YANG Yuanyuan;LI Gang;ZHU Pengli;ZHANG Chao;WU Houya;PENG Xiaohui;SUN Rong;WONG Chingping(Shenzhen Institute of Advanced Electronic Materials,Shenzhen 518103,China;Shenzhen Institute of Advanced Technology,Chinese Academy of Sciences,Shenzhen 518055,China;School of Materials Science and Engineering,Georgia Institute of Technology,Atlanta 30332,USA;Department of Electronics Engineering,the Chinese University of Hong Kong,Hong Kong 999077,China)

机构地区：[1]深圳先进电子材料国际创新研究院,深圳518103 [2]中国科学院深圳先进技术研究院,深圳518055 [3]佐治亚理工学院材料科学与工程学院,亚特兰大30332 [4]香港中文大学电子工程系,中国香港999077

出　　处：《集成技术》2021年第1期47-54,共8页Journal of Integration Technology

基　　金：国家科技部国家重点研发项目(2017YFB0406000)。

摘　　要：焊球可靠性是电子封装过程中重点关注的问题之一,底部填充胶被引入电子封装领域用来匹配基板和芯片之间的热膨胀系数,从而保护焊球,提高焊球的可靠性,但是底部填充胶的引入也会出现老化过程中一些由材料本体变化造成的可靠性问题。该文主要研究了几种老化处理对底部填充胶热机械性能和黏接性能的影响。对于胶水的热机械性能,经过水热老化处理和高温存储老化处理后的变化最为明显。对于胶水的黏接性能,老化处理在有机基底和无机基底表现出的影响并不相同。其中,对无机基底影响较为明显的是高温存储,而对有机基底影响较为明显的是水热老化处理。The reliability of solder joints is one of the key concerns in electronic packaging.Underfill was employed to match the thermal expansion coefficient between the substrate and the IC chip in electronic packaging,thereby protecting the solder joints and improving the reliability of the solder joints.However,the reliability of solder bumped flip chip will be affected by the changes in performance of underfill during the aging process.Therefore,the effects of several aging treatments on the thermo-mechanical properties and adhesion of underfill were studied in this paper.The thermo-mechanical properties of the underfill have the most obvious changes after hydrothermal aging treatment and high-temperature storage life treatment.There is no obvious similarity on organic interface and the inorganic interface for adhesion of underfill.High temperature storage has the most obvious effect on the adhesion of inorganic interfaces,while hydrothermal aging has the most obvious effect on the organic interfaces.

关 键 词：环境老化 底部填充胶 电子封装 

分 类 号：TQ433.4+3[化学工程]