检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:许常悦[1] 郑静[1] 王哲[1] 王彬[1] XU Changyue;ZHENG Jing;WANG Zhe;WANG Bin(Key Laboratory of Aircraft Environment Control and Life Support of the Ministry of Industry and Information Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)
机构地区:[1]南京航空航天大学飞行器环境控制与生命保障工业和信息化部重点实验室,南京210016
出 处:《上海交通大学学报》2021年第4期403-411,共9页Journal of Shanghai Jiaotong University
基 金:国家自然科学基金(11572154、11202100);江苏高校优势学科建设工程资助项目。
摘 要:采用尺度自适应模拟(SAS)方法研究了来流马赫数Ma为0.71、雷诺数Re为4×10^(5)的方柱跨声速绕流,并对分离剪切层和尾迹特性进行了深入分析.为了验证SAS方法的可靠性,将SAS结果与已有数值和实验结果进行了对比.在当前的跨声速流场中,剪切层中的对流马赫数约为0.6,这意味着Kelvin-Helmholtz不稳定性主导剪切层的初始阶段演化.在剪切层的初始阶段,可以看出扰动涡沿展向呈现滚筒状结构.剪切层外侧附近和方柱的回流区均出现倍频现象,这与剪切层中存在明显的涡合并有关.压力场的本征正交分解表明,方柱跨声速流场中的主导流动模态为反对称模态,这与尾迹中的涡脱落现象和剪切层引起的压缩波传播有关.The transonic flow around a square cylinder at Ma=0.71 and Re=4×10^(5) has been studied by using the scale-adaptive simulation(SAS)method,and the characteristics of separated shear layer and wake have been analyzed in depth.To validate the SAS approach,the SAS results are compared with the existing numerical and experimental results.In the present transonic flow,the convective Mach number inside the shear layer is about 0.6.This indicates that the initial evolution of the separated shear layer is dominated by Kelvin-Helmholtz instability,and the roller spanwise eddies in the initial stage of the shear layer can be observed.In the regions near the shear layer and the wake,the doubling frequencies can be obtained indicative of the harmonic phenomenon inside the separated shear layer,which is closely related to the obvious merging of the vortices in the shear layer.Proper orthogonal decomposition of the pressure field shows that the transonic flow field of square cylinder is dominated by the antisymmetric mode,which is associated with the vortex shedding in the wake and the propagation of compression waves induced by the shear layer.
关 键 词:方柱 激波 剪切层 Lamb矢量 尺度自适应模拟
分 类 号:V211.3[航空宇航科学与技术—航空宇航推进理论与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.69