喷嘴本体的熔模铸造工艺及模拟计算  

Process and Simulation Calculation of Nozzle Body Investment Casting

作　　者：杨小建[1] 张怀章[1] 杨国超 王剑[1] 李丰[1] YANG Xiaojian;ZHANG Huaizhang;YANG Guochao;WANG Jian;LI Feng(CSIC No.12 Research Institute,Xingping 713102,China)

机构地区：[1]中国船舶重工集团公司第十二研究所,陕西兴平713102

出　　处：《热加工工艺》2021年第7期66-68,共3页Hot Working Technology

摘　　要：熔模铸造喷嘴本体铸件生产中极易出现缩孔、缩松缺陷。通过对铸件结构特点分析,设计了浇注补缩系统。使用ProCast软件熔模铸造模块,对喷嘴本体铸件凝固过程进行模拟计算。结果表明,按照确定的铸造工艺生产的铸件通过了X射线探伤,未发现缩孔、缩松缺陷。The shrinkage cavity and shrinkage porosity defects are easy to occur in the production of investment casting nozzle body. By analyzing the structural characteristics of castings, the pouring shrinkage system was designed. The solidification process of the nozzle body casting was simulated by using ProCAST software investment casting module. The results show that the castings produced according to the established casting process have passed the X-ray flaw detection and no shrinkage holes and shrinkage porosity defects are found.

关 键 词：喷嘴本体 数值模拟 缩孔缩松 补缩系统 

分 类 号：TG249.5[机械工程—精密仪器及机械]