聚吡咯/聚酰亚胺-压电石英晶体氨气传感器的构建及性能研究  

Construction and Sensing Behaviors of a Polypyrrole/Polyimide-Piezoelectric Quartz Crystal Sensor for Ammonia

作　　者：张玲玲[1] 王建化[1] 姚善卓[1] 周霞[1] Zhang Lingling;Wang Jianhua;Yao Shanzhuo;Zhou Xia(Haidu College,Qingdao Agricultural University,Laiyan,Shandong 265200,China)

机构地区：[1]青岛农业大学海都学院,山东莱阳265200

出　　处：《化学世界》2021年第4期208-213,共6页Chemical World

基　　金：山东省大学生创新创业训练计划(No.S202013997011)资助项目。

摘　　要：采用表面沉积聚吡咯的聚酰亚胺膜作电极,代替金属电极,与压电石英晶体(PQC)串联,设计成聚吡咯/聚酰亚胺-PQC传感器,用于氨气的检测。实验结果表明,该传感器稳定性高,回复性良好,在氨气质量浓度为4~228 mg/m^(3)时,与频移值存在线性关系,检测限为4 mg/m^(3)。A polypyrrole/polyimide-piezoelectric quartz crystal(PQC) sensor for ammonia detection was constructed and its sensing behaviors to ammonia were studied. Polypyrrole polymerized on polyimide was used as conduct electrode instead of metal electrode in PQC sensor. It was directly connected to piezoelectric quartz crystal in series. The experimental results showed that the sensor has high stability and good recovery. There is a linear relationship between the ammonia concentration of 4~228 mg/m^(3) and the frequency shift while the detection limit is 4 mg/m^(3).

关 键 词：聚吡咯 PQC传感器 氨气 

分 类 号：O657.1[理学—分析化学]